Join our mailing list!



Knowledge Base:  
You are here: Knowledge Base > Graphics Gallery
Spray Valve set-up using 2 TS5520 controlled by 2 TS500R fed from a TS1258 pressure pot
Last Updated: 27/12/2011
Spray Valve set-up using 2 TS5520 controlled by 2 TS500R fed from a TS1258 pressure pot
Bench mounted timed dispense system for any size syringe barrels making dots or beads

Was this article helpful?

Comments:
 

Related Articles
 > Typical dual Pinch Valve dispensing system from 500 gram Pressure Pot with digital controller
 > Typical dual TS1212 dispensing system with dual syringe reservoirs, Controlled by digital dispenser
 > Typical cartridge dispense station using 6oz. Techkit & 918 cap assembly. Controlled by TS924.
 > Typical two part adhesive dispensing using TS1212 valve controlled by digital dispenser
 > Typical cartridge to syringe filling station with stand controlled by a TS924 foot valve
 > Typical TS1212 dispense system controlled by ADL810 dispenser
 > Typical TS941 Spool Valve fed by a TS918-20 production master system controlled by a TS250 dispenser
 > Typical TS941 syringe filling system fed by a TS918-20 production master system controlled by a TS250 dispenser
 > TS941 Spool Valve with material supply from TS918-60 Production Master System controlled by TS250 dispenser
 > Typical TS918-20 20oz Production Master System controlled by a TS924V Foot valve
 > TS918 Production Master System with assorted cartridge retainer sets controlled by a TS924V Foot valve
 > TS934A or TS941A Spool Valve controlled by TS350 dispenser
 > TS941A Spool Valve used for cartridge filling controlled by a TS924 Foot valve
 > TS941A Spool Valve supplied from a TS1263 pressure vessel controlled by a TS250 dispenser
 > TS1201 Pinch Valve Pen application with material supplied from TS1215 pressure pot
 > Cartridge based system using a TS918-110 system controlled by a TS250 dispenser
 > Two part adhesive dispensing system with TS1212 valve or TS1201 pen controlled by TS250 dispenser
 > Two part adhesive dispensing system with TS1212 valve controlled by TS350 dispenser
 > TS1212 QUAD System controlled by (2) TS350 dispensers. Fed by a modified TS1258.
 > TS5622VU diaphragm valves (4) controlled by TS500R controllers (4) supplied by pressure pot
 > TS1212 valve supplied by TS125 pressure pot controlled by TS250 dispenser
 > TS1212 valve dispense system supplied by a 30cc syringe controlled by TS250
 > TS1212 valve dispense system supplied by a 20oz cartridge controlled by TS250
 > TS941A valve dispense system supplied by a 12oz cartridge controlled by TS250
 > TS1201 (2) pen valves supplied from pressure pot divided by liquid manifold
 > Cartridge to dual syringe filling station from TS924 footvalve dispenser
 > High pressure silicone to valve dispense system non timed from bulk supply
 > Gravity fed CA adhesive dispense system using TS1201 pen valve
 > TS924 epoxy syringe filling station from pneumatic dual cartridge gun
 > TS5000 Auger Valve remote feed from a 20oz. or 1/10 Gal cartridge using TS500R controller
 > Paste syringe filling station using TS941A high pressure valve fed by customers own bulk supply
 > 4 unit dispense station using TS941 Spool Valves supplied by 12oz cartridges controlled by 2 TS350 dispensers
 > Epoxy dual cartridge setup with a TS1212 valve controlled by a TS250 dispenser
 > 20oz cartridge reservoir system on bench stand supplying TS1201 handheld pen valve
 > TS5622VU CA dispense valve dispense system fed by TS1215 pressure pot with TS350 controller
 > TS9180-110 (2) Production Master Systems with TS941 (2) Spool Valve controlled by TS350
 > 3 person high pressure TS941 spool valve system operated by TS924 footvalves
 > Syringe dispense station controlled by a non timed TS924 Foot Valve
 > Dual TS1212 valve dispensing station controlled by TS500R fed from TS1265 pressure pot
 > Pneumatic TS924 footvalve dispenser controlling 2.5oz cartridge feed system
 > TS1201 dispense pen application fed from a 2 gal pressure Pot.
 > Dual TS5420 needle valves supplied by a 5 gal pail pump controlled by a TS350
 > 4 station dispense system using TS1201 pens fed from 1 gallon pressure pot
 > 2 station dispense system using TS1201 pens fed from 500gram pressure pot
 > TS5000 Auger Valve connection to a TS500R controller
 > TS5622VU diaphragm valve installation for use on an XYZ table controlled by a TS500R controller
 > Multiple TS5440 needle valve installation controlled by 3 TS350 controllers
 > TS918-80 production master system dispensing station controlled by a TS250
 > TS5622VU diaphragm valve system controlled by a TS250 dispenser fed by pressure pot.
 > TS5420 needle valve system controlled by a TS250 dispenser fed by TS1258 pressure pot
 > TS1201 Pinch pen fed from a TS918 retainer/cap assembly with nozzle
 > TS918-6 cartridge feeding a TS941A Spool Valve controlled by a TS250
 > TS5322 dispense station mounted on an XYZ table controlled by a TS500R
 > TS1212 Dispense System with remote feed controlled by a TS250
 > TS5622VU diaphragm valve controlled by TS250 controller material supply from 20oz cartridge assembly
 > 918-80 Production Master System utilizing a TS1212 Micro Shot Valve
 > TS1212 Micro Shot Valve supplied by a two gallon pressure vessel controlled by a TS9150
 > TS1212 micro shot valve fed by a TS918-20 production master system controlled by a TS250
 > Dual TS1201 disposable material path pen application supplied from TS1251 pressure pot
 > TS5420 needle valve system controlled by a TS250 dispenser fed by pressure pot
 > TS5622VT diaphragm valve controlled by a TS500R with material supplied by a 12oz cartridge retainer
 > Dual TS1212 dispense system from TS1215 pressure pot run by TS350
 > Typical bench mounted dual cartridge dispense system controlled by a TS924 foot valve
 > Syringe filling station using the TS918-110 production Master System controlled by a TS924 Foot Valve
 > Dispense station using the TS5420 fed from a TS1215 controlled by a TS250
 > TS5420 needle valve system controlled by a TS350 fed by TS1258
 > Manual dual cartridge gun with material line for dispense adapter
 > Manual dual cartridge gun with fittings for filling syringe barrels
 > TS941A spool valve fed by a 20oz cartridge system controlled by a TS250 dispenser
 > TS941 Spool Valve fed from a pressure pot ready to use with customers own dispenser
 > TS941 Spool Valve fed from a pressure pot run from TS350 dispenser
 > TS941 Spool Valve fed from a pressure pot controlled by an ADL810 dispenser
 > Syringe filling station using a 918-110 production master system
 > 6 TS1212 valve system controlled by a TS350 dispenser fed by a TS1255 pressure pot
 > Dual pneumatic cartridge gun feeding a TS1201 Pinch Tube Pen Valve
 > Cartridge dispense station using 6oz retainer & cap assembly controlled by TS924V
 > Vertical setup using dual cartridges a TS1212 valve and controlled by a TS350
 > TS5322 mini spool valve fed by a TS918-110 production master system controlled by a TS250
 > TS918-110 production master system controlled by a TS924 Foot Valve
 > TS918-60 production master system controlled by a TS924 Foot Valve
 > Bench mounted syringe dispense system controlled by a TS250
 > Spray Valve set-up using 6 TS5520 controlled by 6 TS500R fed from a TS1258 pressure pot
 > TS1215 tank using a TS1201 valve to dispense from a BT16 brush tip
 > TS1258 pressure pot using a TS5520 spray valve controlled by a TS5500R
 > TS918-6 cartridge feed to TS1212 pinch valve controlled with a TS924 dispenser
 > Dual TS5322 spool valves from TS1215 pressure pot controlled by TS350
 > TS5420 needle valve fed from TS1258 pressure pot controlled by TS350
 > TS5520 Spray Valve controlled by a TS500R fed from a TS1258 pressure dispenser
 > TS1212 syringe fill system for UV adhesives fed by a TS1215 pressure pot controlled by a TS250
 > Dual TS941A Valve controlled by a TS250 fed by a Pail Pump system
 > Dual TS1201 disposable material path pen application material supplied from TS1215 tank
 > TS918-110 production master system controlled by a TS924 toot valve
 > TS918 production master system with syringe bracket controlled by a TS924 dispenser
 > TS918-6 production master system using a TS5322 spool valve controlled by a TS250
 > Dual TS1212 dispensing system from TS1215 pressure pot controlled by two TS250's
 > 4 unit station using TS941 spool valves supplied by 20 oz cartridge controlled by TS350's
 > 2 unit dispense station using TS5322 valves mounted on TS918 Stands controlled by two TS250s
 > TS918-110 Dispense Station using a TS941 Spool Valve
 > Ram Elevator System feeding a TS941A Spool Valve controlled by a TS350 dispenser
 > Diaphragm valve setup controlled by a TS500R material supplied by TS1258
 > Syringe dispensing system using a 55cc syringe controlled by a TS350
 > Four TS5620HU diaphragm valves material fed from a TS1258 pressure pot valves controlled by TS250's
 > TS5520 spray valve set-up supplied by a 55cc syringe controlled by a TS500R
 > TS1258 with a TS1201 Dispense Pen
 > TS1258 with four TS1201 Dispense Pens via TS918-46 manifold
 > 2 TS5620HU diaphragm valves via manifold fed from a TS1258 pressure pot controlled by TS350
 > Dispense valve selector chart by valve type
 > TS5620 series diaphragm valve cutaway diagram
 > TS5540 series spray valve cutaway diagram
 > TS5322 series mini spool valve cutaway diagram
 > TS5000DMP series motor driven auger valve cutaway diagram
 > TS5420 series needle valve cutaway diagram
 > TS5440 series needle valve cutaway diagram
 > TS941/ TS941A series spool valve cutaway diagram
 > TS1212 series pinch tube valve cutaway diagram
 > Graphic of TS series ribbon nozzles for cartridges and valves
 > Graphic of typical valve setup showing pressure pot, controller and valve
 > Graphic of typical dispenser setup showing syringe barrel and dispense tip
 > 2 station dispense system on stand using TS1201 pens with manifold fed from 5 litre pressure pot
 > Timed deposits of a 2-part epoxy direct from the dual cartridge using an ADL810 dispenser, TS1212 valve and pneumatic gun
 > Four TS5622VU diaphragm valves from TS918-46 manifold and TS2250 pressure pot
 > Timed deposits of a 2-part epoxy direct from 1 400ml dual cartridge using a 1000T digital dispenser and modified pneumatic applicator
 > 4 station manual dispense system using TS1201 pens with manifold fed from PP300-A 500 gram clear body pressure pot
 > TS5540 series spray valve spare parts
 > TS5622 series diaphragm valve parts list