2 station dispense system on stand using TS1201 pens with manifold fed from 5 litre pressure pot Last Updated: 12/09/2013
2 station dispense system using TS1201 pens fed from 5 litre pressure pot Non-timed hand lever valves using a manifold to distribute feed from any pressure pot
This setup allows fluid to be dispensed from a pressure pot. By using a liquid manifold, the fluid is diverted to (2) two independently controlled hand lever valves. Both or one of the valves can be operated at any time. Using cap seals, each valve can be closed off when not in use. This system is typically recommended for making controlled deposits of Cyanoacrylate adhesives, UV cure, primers, inks, solvents, PVA glues, inks, activators, etc. The valves can be used with standard luer lock dispensing tips or with our brush tips for coating/ spreading. Adjustable air pressure on the tank sets the desired flow rate. This system will run up to (4) four hand lever valves from the manifold.
