Applying solvent based contact adhesive to hair brushes.
|
TS9150 Dispensing Solvent Cement Tapered Tips Video
|
TS9150 Dispensing Solvent Cement Brush Tips Video
|
TS9150 Dispensing Solvent Cement Twin Needle Tip Video
|
TS9150 Dispensing Solvent Cement TTN22 Tip Video
|
Applying solvent based contact adhesive to hair brushes with a robot
|
7015LLPK Orange Colour Tip Cap Seal Luer Lock
7015LLPK Orange Colour Tip Cap Seal Luer Lock
Product Description
Part
7015LLPK is a tip cap seal made from polypropylene that will seal the end of
a syringe b |
2 station dispense system using TS1201 pens fed from 500gram pressure pot
2 station dispense system using TS1201 pens fed from 500 gram pressure pot Non-timed hand lever valves using a manifold to distribute feed from any pressure pot This
setup allows fluid to be dispen |
Dispense station using the TS5420 fed from a TS1215 controlled by a TS250
Dispense station using the TS5420 fed from a TS1215 controlled by a TS250 Simple single head dosing system for inks, solvents, UV cure, oils and other low to medium viscosity fluids. |
TS5420 needle valve system controlled by a TS350 fed by TS1258
TS5420 needle valve system controlled by a TS350 fed by TS1258 Simple single head dosing system for inks, solvents, UV cure, oils and other low to medium viscosity fluids. |
Application guide - liquid filling of vials and bottles
Application guide - liquid filling of vials, bottles and containers using valve system
Customers filling glass or plastic vials, bottles, containers, etc with li |
Medical device industry applications
MEDICAL DEVICE PRODUCTS INDUSTRY APPLICATIONS Apply UV-cure adhesives to needle assemblies Fill electrodes with chlorodised gel Dispense |
2 station dispense system on stand using TS1201 pens with manifold fed from 5 litre pressure pot
2 station dispense system using TS1201 pens fed from 5 litre pressure pot Non-timed hand lever valves using a manifold to distribute feed from any pressure pot This setup allows fluid to be dispensed |
Basic TS250/ TS255 bench dispensers manual applications
The TS250/ TS255 basic dispensers provide tremendous application solutions beyond the traditional industries for dispensing (such as automotive, electronics, computer, medical device makers, etc). Th |
Some typical dispensing applications
Automotive Seal headlight assemblies with RTV Spray marking inks Grease electrical connector pins Apply brazing paste to air conditioners Apply stop-off for plating operations Spray oil to lubricate |
General advice for handling Cyanoacrylates adhesives
Cyanoacrylates are used in ... Ammunitions Appliances Automotive Components Batteries Consumer Products Cosmetic Containers Electronics Loudspeakers Medical Devices Writing Instruments Thousands of t |
30cc manual syringe gun dispenser part codes
Find the equivalent ADL 30cc gun to others. With links to the product page and pricing. All ADL parts are 100% compatible with 30cc dispensing barrels. Part Code Supplier Type ADL Part No. & Link 154 |
Four TS5622VU diaphragm valves from TS918-46 manifold and TS2250 pressure pot
Four TS5622VU diaphragm valves from liquid manifold and single pressure pot Simple multi-valve setup for handling solvents, cyanoacrylates, UV cure, primers, activators, glues, inks and other liquids |
Conformal Coating Product Description - a brief guide
Conformal Coatings: Acrylic - Acrylic Conformal Coatings are easy to apply. They dry to the touch at room temperature in minutes, have g |
4 station manual dispense system using TS1201 pens with manifold fed from PP300-A 500 gram clear body pressure pot
4 station dispense system using TS1201 pens fed from 500 gram pressure pot Non-timed hand lever valves using a manifold to distribute feed from any pressure pot This setup allows fluid to be dispense |
