TS1201 operating instructions for use with a pressure pot
OPERATING INSTRUCTIONS WITH PRESSURE RESERVOIR 1. Connect the fluid tubing from the material reservoir to the female fitting on the pen. 2. Hold the Pen in your hand as if you were writing. Depress t |
TS1201 operating instructions for use with a gravity feed reservoir
OPERATING INSTRUCTIONS WITH GRAVITY FEED RESERVOIR The viscosity of the fluid to be dispensed by gravity, or a combination of gravity/siphon, must be low enough (1 to 800 cps). A liquid tight seal mu |
Semkit and Techkit mixing instructions
Semkit and Techkit cartridges mix instructions
|
Basic syringe gun Instructions
Manual
Syringe Guns 10cc, 30cc and 55cc Sizes - basic instructions
The TS710SG, TS730SG and
TS755SG guns are designed for hand dispensing of most gels, pastes, |
Instructions 50ml dual side by side epoxy type cartridges
Using epoxy type dual cartridges 1:1, 2:1, 4:1 and 10:1 ratio's. Always read and follow the health & safety instructions on the adhesive packaging
and material safety data sheet. Use the approp |
TS570R Smart Auger Valve Controller
TS570R Smart Controller for Auger Valves User Guide h ere |
TS560R Smart Spray Valve Controller
TS560R Smart Controller for Spray Valves User Guide here |
TS550R Smart Dispensing Valve Controller
TS550R Smart Controller for Dispensing Valves User Guide here |
12oz 100A-12 Pneumatic Cartridge Gun
Product
Description
The 100A-12
is a heavy-duty industrial pneumatic hand applicator gun for use with
industry standard 12oz Techcon, EFD and Semco cartrid |
6oz 100A-60 Pneumatic Cartridge Gun
Product
Description
The 100A-60
is a heavy-duty industrial pneumatic hand applicator gun for use with
industry standard 6oz Techcon, EFD and Semco cartridg |
2.5oz 100A-25 Pneumatic Cartridge Gun
Product
Description
The 100A-25
is a heavy-duty industrial pneumatic hand applicator gun for use with
industry standard 2.5oz Techcon and Semco cartridges. |
8oz 100A-80 Pneumatic Cartridge Gun
Product
Description
The 100A-80
is a heavy-duty industrial pneumatic hand applicator gun for use with
industry standard 8oz Techcon and Semco cartridges. I |
TS6100 Techkit/ Semkit Cartridge Mixer Datasheet
Product
Description
The
TS6100 is an automatic Techkit and Semkit cartridge mixer for sizes
2.5oz, 6oz and 8oz. Allows the operator to place the cartrid |
Fisnar part numbers and part codes
Fisnar part numbers and part codes Part #
Description
0603-20140003
Tp Tip Holder Silver
0603-2020017
F7300N Robot Z-Axis Cover
0603-20210007
Dispenser |
Technical Data Sheet (TDS) for GB95 Cyanoacrylate Adhesive
Product Description
GB95 is a general purpose
cyanoacrylate, formulated to provide high tensile and shear strengths on a
wide variety of substrates. This single component adhesive |
TS250 Digital Dispenser Datasheet
TS250 Digital Timed Syringe Dispenser Datasheet
v\:* {behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
w\:* {behavior:url(#default#VML);}
.shape {behavior:url(#def |
70303RHB Adapter Assembly 3cc Size 3ft Long
USE THIS ADAPTER ASSEMBLY AS THE AIR LINK BETWEEN THE PNEUMATIC DISPENSER AND 3CC SIZE BARRELS
Product Description
70303RHB
is an air adapter assembly for 3cc/ml siz |
TS6500 Automatic Techkit Semkit Cartridge Mixer Video
|
Model 195 Semco Shot Meter System
Product Description
The 195
shot-meter is a positive displacement system for precise dispensing of 0.1 to
20cc of material. Ideally suited to syringe filling, this system uses the
2 |
TSD800-6 Dispenser 5-Micron Air Filter
Product Description
The TSD800-6
is an air filter recommended for use with all pneumatic operated dispensers
and electro pneumatic valve controllers. Dispensers require a source of |
