TS924 epoxy syringe filling station from pneumatic dual cartridge gun
TS924 syringe filling station from pneumatic dual cartridge gun For filling barrels direct from dual component cartridges. Select pneumatic gun to suit cartridge size and ratio |
Epoxy dual cartridge setup with a TS1212 valve controlled by a TS250 dispenser
Epoxy dual cartridge setup with a TS1212 valve controlled by a TS250 dispenser For handling two part epoxies, silicones, etc supplied in dual cartridges |
Typical bench mounted dual cartridge dispense system controlled by a TS924 foot valve
Typical bench mounted dual cartridge dispense system controlled by a TS924 foot valve Controlled applicator for epoxies in cartridges 1:1, 2:1, 4:1 and 10:1. |
Manual dual cartridge gun with material line for dispense adapter
Manual dual cartridge gun with material line for dispense adapter Simple hand controlled dispense gun to fluid line from dual component cartridges. |
Manual dual cartridge gun with fittings for filling syringe barrels
Manual dual cartridge gun with fittings for filling syringe barrels Simple hand controlled dispense gun to fill syringe barrels direct from dual component cartridges. |
Vertical setup using dual cartridges a TS1212 valve and controlled by a TS350
Vertical setup using dual cartridges a TS1212 valve and controlled by a TS350 Bench mounted timed dispense system for epoxy type two component cartridges |
Instructions 50ml dual side by side epoxy type cartridges
Using epoxy type dual cartridges 1:1, 2:1, 4:1 and 10:1 ratio's. Always read and follow the health & safety instructions on the adhesive packaging
and material safety data sheet. Use the approp |
Timed deposits of a 2-part epoxy direct from the dual cartridge using an ADL810 dispenser, TS1212 valve and pneumatic gun
Timed shots from a 2-part epoxy type side by side cartridge Bench mounted system for dispensing dual epoxies in 50ml, 200ml or 400ml (1:1, 2:1, 4:1 or 10:1 ratio). The ADL810 dispenser contols the TS |
Timed deposits of a 2-part epoxy direct from 1 400ml dual cartridge using a 1000T digital dispenser and modified pneumatic applicator
Timed shots from a 400ml 2-part epoxy type side by side cartridge Bench mounted system for dispensing dual epoxies in 400ml (1:1, 2:1, 4:1 or 10:1 ratio). The 1000T dispenser contols the cartridge. M |
Cartridge to dual syringe filling station from TS924 footvalve dispenser
Cartridge to dual syringe filling station from TS924 footvalve dispenser Bench mounted system for pastes, gels, silicones, sealants, grease, etc. |
Dual pneumatic cartridge gun feeding a TS1201 Pinch Tube Pen Valve
Dual pneumatic cartridge gun feeding a TS1201 Pinch Tube Pen Valve 2 part material dispenser feeding a hand lever valve with disposable wetted tubes and parts |
Epoxy Definition
Epoxy - Available
in two-part or one-part, both room temperature and heat curable
formulations, epoxy adhesives provide high strength bonds on a wide
variety of substrates. The bond can often t |
Bayonet Mixer Nozzle to 50ml A System Dual Cartridge Check
|
Two part adhesive dispensing system with TS1212 valve controlled by TS350 dispenser
Two part adhesive dispensing system with TS1212 valve controlled by TS350 dispenser For dual component epoxy type cartridges using static mixer nozzles |
Fisnar part numbers and part codes
Fisnar part numbers and part codes Part #
Description
0603-20140003
Tp Tip Holder Silver
0603-2020017
F7300N Robot Z-Axis Cover
0603-20210007
Dispenser |
Acrylic Definition
Acrylic - A
structural adhesive capable of bonding a broad range of substrates
including most types of plastics and metals both minimally prepared and
unprepared. Two-part catalyst cure or one |
Polyurethane Definition
Polyurethane - One
or two-part urethane adhesives provide superior bonds with minimal
surface preparation for today's high performance thermo sets and
thermoplastics. They provide excellent fle |
Silicone Definition
Silicone - One-component
adhesive/sealant that cures to a tough rubbery solid upon exposure to
moisture in the air. Silicone has good resistance to weathering,
vibration, moisture and chemicals |
Luer Lock Tip Adapter Fitting AD931-26
Luer Lock Tip Adapter Fitting AD931-26 Details here |
