8oz 100A-80 Pneumatic Cartridge Gun
Product
Description
The 100A-80
is a heavy-duty industrial pneumatic hand applicator gun for use with
industry standard 8oz Techcon and Semco cartridges. I |
TS6100 Techkit & Semkit Cartridge Automatic Mixer Machine
Automatic Machine mixer for 2.5oz, 6oz and 8oz size Techkit and Semkit cartridges |
Semco cartridge to ADL conversion
Find the equivalent ADL part to the Semco cartridge. With links to the product page and pricing. All ADL parts are compatible. Semco Part Code Sizes &n |
Epoxy Definition
Epoxy - Available
in two-part or one-part, both room temperature and heat curable
formulations, epoxy adhesives provide high strength bonds on a wide
variety of substrates. The bond can often t |
B600 Series Battery Dispensing Gun
|
12oz 100A-12 Pneumatic Cartridge Gun
Product
Description
The 100A-12
is a heavy-duty industrial pneumatic hand applicator gun for use with
industry standard 12oz Techcon, EFD and Semco cartrid |
6oz 100A-60 Pneumatic Cartridge Gun
Product
Description
The 100A-60
is a heavy-duty industrial pneumatic hand applicator gun for use with
industry standard 6oz Techcon, EFD and Semco cartridg |
2.5oz 100A-25 Pneumatic Cartridge Gun
Product
Description
The 100A-25
is a heavy-duty industrial pneumatic hand applicator gun for use with
industry standard 2.5oz Techcon and Semco cartridges. |
TS6100 Techkit/ Semkit Cartridge Mixer Datasheet
Product
Description
The
TS6100 is an automatic Techkit and Semkit cartridge mixer for sizes
2.5oz, 6oz and 8oz. Allows the operator to place the cartrid |
Semco 250-A pneumatic cartridge gun to ADL conversion
Find the equivalent ADL compatible part to the Semco 250-A series pneumatic cartridge guns. With links to the product page and pricing. All ADL parts are compatible. Semco Part Code |
Fisnar cartridge to ADL conversion
Find the equivalent ADL part to the Fisnar cartridge. With links to the product page and pricing. All ADL parts are compatible. Semco Part Code Sizes & |
Fisnar part numbers and part codes
Fisnar part numbers and part codes Part #
Description
0603-20140003
Tp Tip Holder Silver
0603-2020017
F7300N Robot Z-Axis Cover
0603-20210007
Dispenser |
Dilatent Definition
Dilatent - A liquid where viscosity (thickness) increases with shearing rate (when you stir it). Dilatent is the opposite of Thixatropic.
|
Accelerator Definition
Accelerator - A fluid used to speed up material curing Usually a low viscosity single part liquid. Sometimes supplied as an aerosol, in a can or in a bottle with a brush.
|
Acrylic Definition
Acrylic - A
structural adhesive capable of bonding a broad range of substrates
including most types of plastics and metals both minimally prepared and
unprepared. Two-part catalyst cure or one |
Anaerobic Definition
Anaerobic - A
one-part adhesive/sealant that cures only in the absence of air.
Designed for locking screws, nuts, bolts and/or retaining bearings,
shafts, etc. A single part adhesive. Supplied |
Aqueous Definition
Aqueous - Meaning water based fluid or containing water. Common glues including PVA, wood or paper glue. Easily dispensed with manual or air-powered dispensers.
|
Braze Paste Definition
Braze Paste - A paste or flux material. For alloys that melt above 425 deg c. Easily applied using air-powered syringe dispenser.
|
Caulk Definition
Caulk - Uusally a sealant or silicone used to fill gaps as well as describing the process of gap filling.
|
Conductive Epoxy Definition
Conductive Epoxy - A
term used with fluids that will conduct electricity. These materials
often come pre-packed in dispensing barrels or cartridges.
|
