T500S-C Recirculatory Fume Filter Cabinet
Product Code: T500S-C
Price: £1,402.00
Description
T500S-C High Efficiency Filter Cabinet
The T500S-C, a high-efficiency filter cabinet with acrylic capture shield to contain and filter fumes and particles within dental labs, electronic design, pharmaceutical labs, and classroom environments.
Filter unit with centrifugal fan
Acrylic Spray Shield
1 x Particulate filter
1 x Activated Carbon filter
Power Lead
Data/Warranty Booklet
Acrylic Spray Shield
1 x Particulate filter
1 x Activated Carbon filter
Power Lead
Data/Warranty Booklet
What application is this filter cabinet used for?
The T500S-C is suitable for use in numerous situations where external venting is impractical but where contaminant capture and filtration is necessary. This includes the filtration of fumes, vapour and particulates emanating from: Monomers, adhesives, hazardous powders/particulates, conformal coatings, resins, sealants, solders, light grinding particles and dusts, organic solvents etc.
The folding Polycarbonate shield can be stored if not required thus reducing the unit footprint considerably. Handling and / or use of potentially harmful substances is carried out in front of the intake filter area. Cleaned air is vented to the top rear of the units.
Folding clear Polycarbonate plastic fume shield
Carry handle
Sturdy steel construction
Lifetime Guarantee
This filtration system carries a lifetime warranty, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on.
Carry handle
Sturdy steel construction
Lifetime Guarantee
This filtration system carries a lifetime warranty, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on.
How does this filter cabinet remove harmful contaminants?
The particulate (intake) filter is a three stage graduated fibre filter (filtration to 5.0 micron particles) with a high dust holding capacity for long life. (Optional EPA filters available to 0.3 micron particles). This is followed by a high grade bonded carbon filter. Through the process of filtration, adsorption and dilution, operator exposure to potentially hazardous substances is vastly reduced or eliminated.
These units are designed for immediate operator protection from concentrations of airborne contaminants whereby all gases, fumes, vapours and particulates at the front of the unit are drawn into the intake filter. Cleaned air is exhausted to the top rear of the cabinet.
Weight: 25KG
Description: Fan/filter casing (steel construction finished in grey) - clear PETG folding plastic fume shield - particulate (Intake Filter) - 3.5kg bonded carbon filter - centrifugal blower, external rotor motor type brushless, UL, VDE and CSA ap-proved - sealed electrical wiring and switch, downstream of filters.
Air Volume at Free Air: 355m3/hr
Ave. Air Velocity at Filter Face: 0.55m/sec
Ave. Air Velocity at Shield Face: 0.38m/sec
Filters: IFA3 Particle Filter, AC200 Activated Carbon Filter. EPA Fine Particle filter available as optional extra and upgraded HEPA
Fan Motor Spec: 230V 50Hz 105W
Noise Level LAeq db(A): 60
Approvals: CE, REACH, COSHH
Commodity Code: 84213925
Origin: GB
Description: Fan/filter casing (steel construction finished in grey) - clear PETG folding plastic fume shield - particulate (Intake Filter) - 3.5kg bonded carbon filter - centrifugal blower, external rotor motor type brushless, UL, VDE and CSA ap-proved - sealed electrical wiring and switch, downstream of filters.
Air Volume at Free Air: 355m3/hr
Ave. Air Velocity at Filter Face: 0.55m/sec
Ave. Air Velocity at Shield Face: 0.38m/sec
Filters: IFA3 Particle Filter, AC200 Activated Carbon Filter. EPA Fine Particle filter available as optional extra and upgraded HEPA
Fan Motor Spec: 230V 50Hz 105W
Noise Level LAeq db(A): 60
Approvals: CE, REACH, COSHH
Commodity Code: 84213925
Origin: GB
Demonstrating adequate control of the risks to the health of employees students and the general public, from dusts, powders, mists, fumes and vapours is the fundamental requirement of the Control of Substances Hazardous to Health (CoSHH). For LEV information for employers visit the HSE website.
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
Features
- Easy setup
- Small footprint
- Cabinet version
- Filtration to 5 micron
- High suction force
- Suitable for lead-free solder fumes
- Universal power: 230VAC, 50-60Hz
- CE certified.