Epoxy Definition
Epoxy - Available
in two-part or one-part, both room temperature and heat curable
formulations, epoxy adhesives provide high strength bonds on a wide
variety of substrates. The bond can often t |
Adhesive Dispensing Valve Selection Guide
Adhesive Dispensing Valve Selection Guide
v\:* {behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
w\:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
|
Conductive Epoxy Definition
Conductive Epoxy - A
term used with fluids that will conduct electricity. These materials
often come pre-packed in dispensing barrels or cartridges.
|
Cyanoacrylate Definition
Cyanoacrylate - A
one-part adhesive that cures instantly on contact with mated surfaces.
High strength, excellent adhesion to a wide variety of substrates.
Cyanoacrylates are available in a var |
Silicone Definition
Silicone - One-component
adhesive/sealant that cures to a tough rubbery solid upon exposure to
moisture in the air. Silicone has good resistance to weathering,
vibration, moisture and chemicals |
Acrylic Definition
Acrylic - A
structural adhesive capable of bonding a broad range of substrates
including most types of plastics and metals both minimally prepared and
unprepared. Two-part catalyst cure or one |
Alloy Definition
Alloy - A combined substance of two or more metals or a metal and non-metal that fuse together and dissolve in each other when molten.
|
Anaerobic Definition
Anaerobic - A
one-part adhesive/sealant that cures only in the absence of air.
Designed for locking screws, nuts, bolts and/or retaining bearings,
shafts, etc. A single part adhesive. Supplied |
Aqueous Definition
Aqueous - Meaning water based fluid or containing water. Common glues including PVA, wood or paper glue. Easily dispensed with manual or air-powered dispensers.
|
Balling Definition
Balling - A solder paste term. A separation effect when the liquid carrier is forced out of the solids.
|
Braze Paste Definition
Braze Paste - A paste or flux material. For alloys that melt above 425 deg c. Easily applied using air-powered syringe dispenser.
|
Caulk Definition
Caulk - Uusally a sealant or silicone used to fill gaps as well as describing the process of gap filling.
|
Centipoise Definition
Centipoise - Normally
written as cps, this is a way of measuring the viscosity (thickness) of
a product. The higher the number, the thicker the fluid. 100cps = 1
POISE. 1 cp = 1 mPas.
|
Hot Melt Definition
Hot Melt - A
thermoplastic material that is melted in dispensing equipment and is
applied in a molten state. It then wets the substrate surface and as it
cools, it solidifies forming a bond. Ve |
Polyurethane Definition
Polyurethane - One
or two-part urethane adhesives provide superior bonds with minimal
surface preparation for today's high performance thermo sets and
thermoplastics. They provide excellent fle |
Dispense valve selector chart by valve type
A wide range of fluid dispensing valves from simple manual dispensing to precision valves for high speed automated applications. The range of valves include: � Disposable material path valves for use |
General advice for handling Cyanoacrylates in bottles
Cyanoacrylate adhesive, more popularly known as super glue, or �CA� glue,
is the most often used adhesive in a assembly processes. It helps to
have super glue as an adhesive among other glues for |
Reducing Hand Fatigue and Variability in Medical Device Assembly Processes
Reducing Hand Fatigue and Variability in Medical Device Assembly Processes Thank you for your interest in Adhesive Dispensing Ltd air-powered dispensing technology. For a confidential discussion of h |
General advice for handling Cyanoacrylates adhesives
Cyanoacrylates are used in ... Ammunitions Appliances Automotive Components Batteries Consumer Products Cosmetic Containers Electronics Loudspeakers Medical Devices Writing Instruments Thousands of t |
Safety Data Sheet (SDS) for Dow Corning 781 Silicone Sealant
Material Safety Data Sheet MSDS Dow Corning 781
Product Information
Construction
DOW CORNING 781
Acetoxy Silicone
Sealant
|
