Syringe Gun Applicator Video
|
Manual Syringe Gun Applicator making controlled beads of RTV
|
Air Hose Connector Types for Cartridge Applicator Guns
Airline hose connectors for cartridge applicator guns |
Epoxy Definition
Epoxy - Available
in two-part or one-part, both room temperature and heat curable
formulations, epoxy adhesives provide high strength bonds on a wide
variety of substrates. The bond can often t |
Timed deposits of a 2-part epoxy direct from 1 400ml dual cartridge using a 1000T digital dispenser and modified pneumatic applicator
Timed shots from a 400ml 2-part epoxy type side by side cartridge Bench mounted system for dispensing dual epoxies in 400ml (1:1, 2:1, 4:1 or 10:1 ratio). The 1000T dispenser contols the cartridge. M |
Accelerator Definition
Accelerator - A fluid used to speed up material curing Usually a low viscosity single part liquid. Sometimes supplied as an aerosol, in a can or in a bottle with a brush.
|
Activator Definition
Activator - A
fluid used to cure an adhesive or clean a component prior to the
adhesive being applied. Sometimes associated with Cyanoacrylates in
brush or spray format. Also used as the second |
Acrylic Definition
Acrylic - A
structural adhesive capable of bonding a broad range of substrates
including most types of plastics and metals both minimally prepared and
unprepared. Two-part catalyst cure or one |
Alloy Definition
Alloy - A combined substance of two or more metals or a metal and non-metal that fuse together and dissolve in each other when molten.
|
Anaerobic Definition
Anaerobic - A
one-part adhesive/sealant that cures only in the absence of air.
Designed for locking screws, nuts, bolts and/or retaining bearings,
shafts, etc. A single part adhesive. Supplied |
Aqueous Definition
Aqueous - Meaning water based fluid or containing water. Common glues including PVA, wood or paper glue. Easily dispensed with manual or air-powered dispensers.
|
Balling Definition
Balling - A solder paste term. A separation effect when the liquid carrier is forced out of the solids.
|
Braze Paste Definition
Braze Paste - A paste or flux material. For alloys that melt above 425 deg c. Easily applied using air-powered syringe dispenser.
|
Caulk Definition
Caulk - Uusally a sealant or silicone used to fill gaps as well as describing the process of gap filling.
|
Centipoise Definition
Centipoise - Normally
written as cps, this is a way of measuring the viscosity (thickness) of
a product. The higher the number, the thicker the fluid. 100cps = 1
POISE. 1 cp = 1 mPas.
|
Conductive Epoxy Definition
Conductive Epoxy - A
term used with fluids that will conduct electricity. These materials
often come pre-packed in dispensing barrels or cartridges.
|
Cyanoacrylate Definition
Cyanoacrylate - A
one-part adhesive that cures instantly on contact with mated surfaces.
High strength, excellent adhesion to a wide variety of substrates.
Cyanoacrylates are available in a var |
Hot Melt Definition
Hot Melt - A
thermoplastic material that is melted in dispensing equipment and is
applied in a molten state. It then wets the substrate surface and as it
cools, it solidifies forming a bond. Ve |
50ml Manual Dual Syringe Guns Video
|
Syringe Dispensing Applications
|
