Typical two part adhesive dispensing using TS1212 valve controlled by digital dispenser
Typical two part adhesive dispensing using TS1212 valve controlled by digital dispenser |
Two part adhesive dispensing system with TS1212 valve or TS1201 pen controlled by TS250 dispenser
Two part adhesive dispensing system with TS1212 valve or TS1201 pen controlled by TS250 dispenser Can be other sized cartridge system if required |
Two part adhesive dispensing system with TS1212 valve controlled by TS350 dispenser
Two part adhesive dispensing system with TS1212 valve controlled by TS350 dispenser For dual component epoxy type cartridges using static mixer nozzles |
Epoxy Definition
Epoxy - Available
in two-part or one-part, both room temperature and heat curable
formulations, epoxy adhesives provide high strength bonds on a wide
variety of substrates. The bond can often t |
TS6100 Techkit/ Semkit Cartridge Mixer Datasheet
Product
Description
The
TS6100 is an automatic Techkit and Semkit cartridge mixer for sizes
2.5oz, 6oz and 8oz. Allows the operator to place the cartrid |
Bench-top fluid dispensing: Easy when you know how
Bench-top fluid dispensing: Easy when you know how
Manual
handheld, semi-automatic and automatic represent the three dispensing |
Rotary Auger Valves � Pros and Cons
Rotary Auger Valves � Pros and Cons For more than 20 years, the Rotary Auger valve dispensing system has been recognised as the workhorse for the electronics industry. The TS5000 Series Auger valves |
Dispensing Adhesives Material Can Be Challenging
Dispensing Adhesives Material Can Be Challenging
Dispensing
adhesives can be a challenging application. Choosing the right type |
Technical Data Sheet (TDS) for GB95 Cyanoacrylate Adhesive
Product Description
GB95 is a general purpose
cyanoacrylate, formulated to provide high tensile and shear strengths on a
wide variety of substrates. This single component adhesive |
Activator Definition
Activator - A
fluid used to cure an adhesive or clean a component prior to the
adhesive being applied. Sometimes associated with Cyanoacrylates in
brush or spray format. Also used as the second |
Acrylic Definition
Acrylic - A
structural adhesive capable of bonding a broad range of substrates
including most types of plastics and metals both minimally prepared and
unprepared. Two-part catalyst cure or one |
Anaerobic Definition
Anaerobic - A
one-part adhesive/sealant that cures only in the absence of air.
Designed for locking screws, nuts, bolts and/or retaining bearings,
shafts, etc. A single part adhesive. Supplied |
Cyanoacrylate Definition
Cyanoacrylate - A
one-part adhesive that cures instantly on contact with mated surfaces.
High strength, excellent adhesion to a wide variety of substrates.
Cyanoacrylates are available in a var |
Polyurethane Definition
Polyurethane - One
or two-part urethane adhesives provide superior bonds with minimal
surface preparation for today's high performance thermo sets and
thermoplastics. They provide excellent fle |
Silicone Definition
Silicone - One-component
adhesive/sealant that cures to a tough rubbery solid upon exposure to
moisture in the air. Silicone has good resistance to weathering,
vibration, moisture and chemicals |
231218 20oz Aerospace Sealant Cartridge Dispenser Gun TDS
Data Sheet for model 231218 - 20 Ounce Cartridge Dispenser Data Sheet Details here |
MAH 06-21T Static Mixer Nozzle Data Sheet
Static mixer nozzle MAH 06-21T - 102380 For Data Sheet please click here |
Syringe Guns Data Sheet 2022
To view this data sheet, please click here |
Luer Lock Tip Adapter Fitting AD931-26
Luer Lock Tip Adapter Fitting AD931-26 Details here |
VBE400MR 400ml 2K Aerospace Sealant Dispenser Gun TDS
Data Sheet for model VBE400MR - 600ml Battery Cartridge Dispenser Data Sheet Details here |
