TS918 Production Master System with assorted cartridge retainer sets controlled by a TS924V Foot valve
TS918 Production Master System with assorted cartridge retainer sets controlled by a TS924V Foot valve |
Cartridge based system using a TS918-110 system controlled by a TS250 dispenser
Cartridge based system using a TS918-110 system controlled by a TS250 dispenser Can be other sized cartridge system if required |
TS1212 valve dispense system supplied by a 20oz cartridge controlled by TS250
TS1212 valve dispense system supplied by a 20oz cartridge controlled by TS250 For micro shots or beads of most low to high viscosity liquids |
TS941A valve dispense system supplied by a 12oz cartridge controlled by TS250
TS941A valve dispense system supplied by a 12oz cartridge controlled by TS250 For micro shots or beads of most medium to high viscosity liquids |
20oz cartridge reservoir system on bench stand supplying TS1201 handheld pen valve
20oz cartridge reservoir system on bench stand supplying TS1201 handheld pen valve For low to medium viscosity liquids making non-timed deposits |
Pneumatic TS924 footvalve dispenser controlling 2.5oz cartridge feed system
Pneumatic TS924 footvalve dispenser controlling 2.5oz cartridge feed system Non-timed pneumatic dispenser controlling cartridge system on bench stand. Other sizes available |
Typical bench mounted dual cartridge dispense system controlled by a TS924 foot valve
Typical bench mounted dual cartridge dispense system controlled by a TS924 foot valve Controlled applicator for epoxies in cartridges 1:1, 2:1, 4:1 and 10:1. |
TS941A spool valve fed by a 20oz cartridge system controlled by a TS250 dispenser
TS941A spool valve fed by a 20oz cartridge system controlled by a TS250 dispenser System for making repeat deposits or beads of medium to high viscosity pastes, silicones, RTVs and gels. |
Techcon Systems - Cartridge Plunger Comparison
Cartridge plungers ensure that the pressure is evenly spread across the fluid surface to provide consistent dispensing. Wiping edges prevent dripping and eliminate material waste by wiping the cartri |
Bayonet Mixer Nozzle to 50ml A System Dual Cartridge Check
|
Syringe filling station using a 918-110 production master system
Syringe filling station using a 918-110 production master system Transfer of gels, pastes, silicones, greases and other fluids from 310ml cartridge to any syringe barrel |
Two part adhesive dispensing system with TS1212 valve or TS1201 pen controlled by TS250 dispenser
Two part adhesive dispensing system with TS1212 valve or TS1201 pen controlled by TS250 dispenser Can be other sized cartridge system if required |
Two part adhesive dispensing system with TS1212 valve controlled by TS350 dispenser
Two part adhesive dispensing system with TS1212 valve controlled by TS350 dispenser For dual component epoxy type cartridges using static mixer nozzles |
Cartridge to dual syringe filling station from TS924 footvalve dispenser
Cartridge to dual syringe filling station from TS924 footvalve dispenser Bench mounted system for pastes, gels, silicones, sealants, grease, etc. |
TS9180-110 (2) Production Master Systems with TS941 (2) Spool Valve controlled by TS350
TS9180-110 (2) Production Master Systems with TS941 (2) Spool Valve controlled by TS350 Cartridge feed system with timed controller to spool valves for thick pastes, gels, silicones, etc |
TS918-80 production master system dispensing station controlled by a TS250
TS918-80 production master system dispensing station controlled by a TS250 Simple dispensing system direct from cartridges. Either repeat deposits or beads |
TS1201 Pinch pen fed from a TS918 retainer/cap assembly with nozzle
TS1201 Pinch pen fed from a TS918 retainer/cap assembly with nozzle Non timed pen valve fed from large cartridge system |
TS918-6 cartridge feeding a TS941A Spool Valve controlled by a TS250
TS918-6 cartridge feeding a TS941A Spool Valve controlled by a TS250 Cartridge feed system to high pressure spool valve for handling medium to high viscosity gels and pastes |
918-80 Production Master System utilizing a TS1212 Micro Shot Valve
918-80 Production Master System utilizing a TS1212 Micro Shot Valve Medium size cartridge reservoir feeding a valve with control of dots/ lines from a digital dispenser |
TS1212 micro shot valve fed by a TS918-20 production master system controlled by a TS250
TS1212 micro shot valve fed by a TS918-20 production master system controlled by a TS250 Large size cartridge reservoir feeding a pinch valve with control of dots/ lines from a digital dispense |
