TS120CPB-LD-250 12oz Cartridge/ Plunger Kit Datasheet
TS120CPB-LD-250 12oz Cartridge/ Plunger Kit Datasheet View or download the data sheet securely here Product details and pricing available here Please contact our sales team for advice on these produc |
Epoxy Definition
Epoxy - Available
in two-part or one-part, both room temperature and heat curable
formulations, epoxy adhesives provide high strength bonds on a wide
variety of substrates. The bond can often t |
Cyanoacrylate Adhesive Slump Test 2500 cps
|
Fluid Viscosity Chart Table
Viscosity General Table
Material Viscosity (In Centipoise) or
cps.
Water @
70�F
Blood or Kerosene
Anti-Freeze or Ethylene Glycol
Motor Oil (SAE 10) |
Viscosity of Fluids to Compare With
Viscosity General Table
Material Viscosity
(In Centipoise) or cps.
Water
@ 70�F
Blood or Kerosene
Anti-Freeze or Ethylene Glycol
Motor Oil (SAE 10) or Sunflower Oil
M |
Centipoise Definition
Centipoise - Normally
written as cps, this is a way of measuring the viscosity (thickness) of
a product. The higher the number, the thicker the fluid. 100cps = 1
POISE. 1 cp = 1 mPas.
|
Application guide - liquid filling of vials and bottles
Application guide - liquid filling of vials, bottles and containers using valve system
Customers filling glass or plastic vials, bottles, containers, etc with li |
Bench-top fluid dispensing: Easy when you know how
Bench-top fluid dispensing: Easy when you know how
Manual
handheld, semi-automatic and automatic represent the three dispensing |
Rotary Auger Valves � Pros and Cons
Rotary Auger Valves � Pros and Cons For more than 20 years, the Rotary Auger valve dispensing system has been recognised as the workhorse for the electronics industry. The TS5000 Series Auger valves |
Dispensing Adhesives Material Can Be Challenging
Dispensing Adhesives Material Can Be Challenging
Dispensing
adhesives can be a challenging application. Choosing the right type |
Improving the Grease Dispensing Process
Improving the Grease Dispensing Process. Automotive parts manufacturers as well as other manufacturers have been challenged with dispensing |
TS1201 operating instructions for use with a gravity feed reservoir
OPERATING INSTRUCTIONS WITH GRAVITY FEED RESERVOIR The viscosity of the fluid to be dispensed by gravity, or a combination of gravity/siphon, must be low enough (1 to 800 cps). A liquid tight seal mu |
Dilatent Definition
Dilatent - A liquid where viscosity (thickness) increases with shearing rate (when you stir it). Dilatent is the opposite of Thixatropic.
|
Technical Data Sheet (TDS) for GB95 Cyanoacrylate Adhesive
Product Description
GB95 is a general purpose
cyanoacrylate, formulated to provide high tensile and shear strengths on a
wide variety of substrates. This single component adhesive |
Accelerator Definition
Accelerator - A fluid used to speed up material curing Usually a low viscosity single part liquid. Sometimes supplied as an aerosol, in a can or in a bottle with a brush.
|
Acrylic Definition
Acrylic - A
structural adhesive capable of bonding a broad range of substrates
including most types of plastics and metals both minimally prepared and
unprepared. Two-part catalyst cure or one |
Anaerobic Definition
Anaerobic - A
one-part adhesive/sealant that cures only in the absence of air.
Designed for locking screws, nuts, bolts and/or retaining bearings,
shafts, etc. A single part adhesive. Supplied |
Aqueous Definition
Aqueous - Meaning water based fluid or containing water. Common glues including PVA, wood or paper glue. Easily dispensed with manual or air-powered dispensers.
|
Braze Paste Definition
Braze Paste - A paste or flux material. For alloys that melt above 425 deg c. Easily applied using air-powered syringe dispenser.
|
Caulk Definition
Caulk - Uusally a sealant or silicone used to fill gaps as well as describing the process of gap filling.
|
