Join our mailing list!



Knowledge Base:  
You are here: Knowledge Base > Timed Shot Pneumatic Fluid Dispensers
TSD800-6EL Dispenser 5 Micron Air Filter Regulator
Last Updated: 21/11/2022

Product Description

The TSD800-6FR is an air regulator with filter recommended for use with all pneumatic operated dispensers, pressure pots, cartridges and electronic valve controllers. Many dispensing products require a supply of compressed air that is regulated to the correct pressures. Excessive air can damage the products and not enough air and certain products will not operate correctly. It also helps to regulate the air supply to pressure pots and tanks for controlled flow of liquids. The filter is 5 micron removing 99% of moisture and particles to protect equipment.

Typical Applications

Use this air filter regulator with any air powered dispensing controller between the mains air supply and dispenser input hose or on air supply into a pressure pot or cartridge reservoir.

Instructions

1. Attach dispenser hose, pressure pot air hose or cartridge air hose to 1/4 Inch NPT thread outlet.
2. Attach mains air to 1/4 Inch NPT thread regulator inlet.

3. Set air supply between 60 to 100 psi.
4. Drain filter bowl of liquid and change filter when required.

Part Numbers

TSD800-6FR

Air Filter Regulator

TSD800-6

Air Filter

TSD800-6P

Air Regulator

Technical Information

Part ID:

TSD800-6FR

Connection In:

1/4 Inch NPT

Connection Out:

1/4 Inch NPT

Regulator:

0 to 100 psi

Flow Rate:

100 scfm

Maximum Pressure:

100 psi


Price and Lead Time

The TSD800-6FR filter regulator is competitively priced and is available with short lead times.

Packaging

The TSD800-6FR filter regulator is supplied in sealed packaging with full assembly instructions.

Health & Safety in Use

The TSD800-6FR is safe to use and simple to install, reducing risk of excessive pressure in an air line from damaging dispensing equipment and affecting adhesives. This air regulator attaches easily to a mains airline or compressor. For a filter with adjustable regulator and gauge, use our TSD800-6FR.

Features

- Controls air pressure

- Large display gauge

- Compatible with all dispensers

- 5 micron filter

- Removes 99% of particles and moisture

- Replaceable filters

- Supplied with fittings

- 12 month warranty

Most of our products are available to order from stock. Our extensive web shop provides a safe and secure method of ordering products. We also offer credit accounts. For UK customers, please fax your purchase orders to 0845 652 0059 and we�ll open an account for you.



Was this article helpful?

Comments:
 

Related Articles
 > JB1113 Dispenser Datasheet
 > TS250 Digital Dispenser Datasheet
 > TSD800-6 Dispenser 5-Micron Air Filter
 > DX9010 Electric Finger Switch for TS Series Dispensers
 > TS250 Digital Timed Shot Dispenser TDS
 > AD1001 Digital Timed Shot Dispenser TDS
 > 1000T Digital Timed Shot Dispenser TDS
 > DC100 Digital Timed Shot Dispenser TDS