Edge dispensing manifold applicators
High performance hot melt glue dispensing systems for manual hand
controlled or fully automated use. A range of robust melter units with
heated hoses, pattern controllers, nozzles and accessories. For product
assembly or carton packaging as well as many other applications.
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all
assembly fluids - from watery liquids, solvents, primers and activators
through to thick pastes, sealants, silicones, gels and epoxies. |
|
|
Air Solenoids
|
Solenoid
|
System Use
|
Type Voltage
|
|
HS3115
|
Edge Manifold 3-Way
|
115VAC
|
|
HS3220
|
Edge Manifold 3-Way
|
220VAC
|
|
HS324
|
Edge Manifold 3-Way
|
24VDC
|
Nozzle Extrusion and Right Angle
|
Nozzle
|
Description
|
Inch
|
mm
|
|
HN31
|
Nozzle Extrusion
|
0.010
|
0.254
|
|
HN32
|
Nozzle Extrusion
|
0.012
|
0.305
|
|
HN33
|
Nozzle Extrusion
|
0.015
|
0.381
|
|
HN34
|
Nozzle Extrusion
|
0.017
|
0.432
|
|
HN35
|
Nozzle Extrusion
|
0.020
|
0.508
|
|
HN36
|
Nozzle Extrusion
|
0.025
|
0.645
|
|
HN37
|
Nozzle Extrusion
|
0.030
|
0.762
|
|
HN40
|
Nozzle Extrusion
|
0.040
|
1.016
|
|
HN11
|
Nozzle Right Angle Adapter
|
|
|
|
HN25
|
Nozzle for Right Angle
|
0.010
|
0.254
|
|
HN16
|
Nozzle for Right Angle
|
0.015
|
0.381
|
|
HN18
|
Nozzle for Right Angle
|
0.020
|
0.508
|
|
HN27
|
Nozzle for Right Angle
|
0.025
|
0.645
|
|
HN28
|
Nozzle for Right Angle
|
0.030
|
0.762
|
Commonly used in corrugated or folded carton applications to dispense hot melt
in either horizontal or vertical modes. Manifold applicators are available in
versions to take one, two or four dispense valves. Each applicator is available
in 110V and 220V models and each requires a separate 3-way electric solenoid,
available in 24VDC, 110VAC and 220VAC.
Valves
Dispense valves are available
in-line (extrusion) for top carton applications and right angle models for
bottom carton applications, ensuring hot melt adhesive is always dispensed with
gravity.
Operation
Material is fed to the manifold by a
heated hose; a control cable from the hose connects carries the necessary
circuit to heat the manifold, it also provides the signal to the external 3-way
solenoid. Clean factory air is connected to the air solenoid and switched to operate
the manifold. Module valves are fitted to the manifold to dispense the
material.
Dispensing Manifold Applicators
|
Manifold
|
Type
|
Voltage
|
|
HM071
|
1
Valve
|
110V
|
|
HM072
|
1
Valve
|
220V
|
|
HM073
|
2
Valve
|
110V
|
|
HM074
|
2
Valve
|
220V
|
|
HM075
|
4
Valve
|
110V
|
|
HM076
|
4
Valve
|
220V
|
|
