GB20 is specially formulated for the bonding of plastics, rubbers, wood, metals and other common substrates. Recommended for use on assemblies with very close fitting parts and smooth, even surfaces. Can be used as a post-assembly adhesive to wick into parts. A quality low viscosity cyanoacrylate formulated for cosmetically critical applications. Ideal for bonding black shiny surfaces, clear acrylics, electronics, jewellery. Use this super low viscosity grade for close fitting parts.
Produces rapid bond between a variety of materials including woods, plastics, rubbers, metals, paper, card and leather.
This adhesive can be applied using our syringe barrel dispensers or direct from the larger bottles using our metering valves, controller and pressure pot. All CAs are shipped with TDS and MSDS. This grade is suitable for bonding difficult substrates, absorbent and porous surfaces, e.g. paper, wood, cardboard and leather as well as superfast cure with plastics, metals, ceramics, and rubbers. Due to the surface insensitive nature of GB20, this grade also maintains a rapid fixture time on acidic surfaces such as wood, leather and dichromated metals. This very low viscosity grade will bond woods, metals, plastics, rubbers, and elastomers e.g. EPDM.
Part ID: GB4320-50
Material: Ethyl
Bottle Size: 50 gram
Colour: Clear
Viscosity: 1-3 CPS
Max Gap Fill: 0.05 mm
Temp. Range: -50 to 80 C
Fixture Time: Steel to Steel < 15 seconds @ 20 C
Fixture Time: ABS to ABS < 5 seconds @ 20 C
Fixture Time: Rubber to Rubber < 5 seconds @ 20 C
Fixture Time: Wood (Balsa) < 3 seconds @ 20 C
Typical Strength: 21 N/mm2
Bonds: Wood, Card, Paper, Fabric, Plastic, Rubber, Metal
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all
assembly fluids - from watery liquids, solvents, primers and activators
through to thick pastes, sealants, silicones, gels and epoxies.
   
- Part ID: GB20-50
- Material: Ethyl
- Bottle Size: 50 gram
- Colour: Clear
- Viscosity: 1-3 cps
- Max Gap Fill: 0.05mm
- Temp. Range: -50 to 80 C
- Fixture Time: < 5 seconds @ 20 C
- Typical Strength: 5 to 28 N/mm2
- Bonds: Card, Paper, Fabric, Plastic, Rubber, Metal
Materials should not be used without consulting the MSDS, which contains full information regarding the use of this product, including Transport, Disposal, Toxicological, Exposure Controls, Accidental Release and First Aid measures essential to the safe use of this product.
|
