The VD510 Series dispense valves accurately control the application of most low to medium viscosity fluids without drips. The unique seal-less design incorporates an inert polymer diaphragm that isolates the actuator from the valve. The adjustable open/close stroke 0.13 to 0.64 mm (0.005" to 0.025") allows for a very fast response with positive shutoff.

Wetted components are made of inert plastic and stainless steel. Takes a direct feed from any pressure pot, cartridge or syringe and includes a selection of flexible fluid line tubing and connectors. Valve open time can be as short as 15 milliseconds.

This version has a stainless steel body. Model VD510-SS with UHMW* polymer and stainless steel wetted parts is used for dispensing solvents, gels, UV cure, liquids and glues. Simple to use with TS550R, TS250, TS350 digital timed controllers.
*Ultra High Molecular Weight polyethylene.

SPECIFICATIONS

Operating Air Pressure: 70 - 100 psi
Material Delivery Pressure: 100 psi max
Flow Rate Maximum: 0.3 l/min
Valve Body: Aluminum/SS
Valve Piston: SUS303
Valve Piston Seal:NBR
Wetted Part Materials:UHMWE-PE
Air Input: M5 x 0.8
Material Inlet: 1/8� NPT
Material Outlet: Luer Lock
Mounting Hole Detail: M5 x 0.8
Weight (VD510-SS): 121g
Commodity Code: 84248940

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

• Part ID: VD510-SS
• Wetted Materials: UHMW/ Stainless Steel, NBR�
• Size: 96mm L x 27mm Dia..
• Weight: 75g
• Viscosity Range: 1 - 50,000 CPS
• Repeatability: �0.30%
• Cycle Rate: Up to 500 cycles/ minute
• Flow Rate (water): 3000ml/minute @ 100 psi
• Min Shot Size: 0.01 cc/ ml
• Max Fluid Pressure: 100 psi ( 5 Bar)
• Activation Pressure: 70 psi (4.8 bar) minimum
• Material Inlet: 1/8" NPT
• Material Outlet: 1/4-28 UNF
• Mounting: 10-32 UNF
• Warranty: 1 Year

Diaphragm valves are used for many varied assembly and production processes where controlled deposits of low to medium viscosity liquids need to be applied. Common applications include:-
 
Dots and beads of Cyanoacrylates  
Dots and beads of solvents
Dots and beads of UV cure
Dots and beads of PVA glues
Deposits of liquid fluxes
Dots and beads of threadlockers
General adhesive application