Retainers and caps are
used with the full range of cartridges to provide a pressured feed
of adhesives, liquids and pastes to dispense valves or when
dispensing direct. Retainers can be hand held or stand mounted using
our range of accessories. Retainers and caps are safe for use up to
100 psi pressure. The range of Techcon retainers and caps can be used with Techcon and Semco plastic cartridges.
Retainer bodies and caps
for use with cartridges from sizes 2.5oz (60cc) to 20oz (600cc). Cartridge
reservoir systems are a useful method of feeding sealants, silicones and greases
to metering valves under regulated pressure. Retainers and caps are safe for use
to high air pressures and can be used with a pneumatic dispenser or a regulated air supply. Or use our
part TSD800-6FR filter regulator
with gauge if adjustment to air flow is required from the mains supply.
The filled plastic cartridge is placed inside the retainer body and the air cap is attached. Use 310ml (1/10 gallon) size retainers for pre-filled silicone or sealant tubes.
