Precision Dispensing Tips with a 0.25" long stainless steel tube.

The TS Series dispensing tips offer a variety of dispensing performance and flexibility options. Stainless steel tubing is cut to precise lengths and ground to be burr-free. Cut tubing is crimped into aluminium locking insert, then moulded into polyethylene hubs. Moulded hub colours correspond to gauge size.

Available with a tube length of 0.25" (6.35mm). Pricing is for a pack of 50 tips. All TS Series tips secure to syringe barrels and correspond to the luer lock specification. Tips are colour coded for gauge size. The tip uses a slightly tapered internal design where the shaft joins the hub to ease fluid flow and reduce restriction. This allows for a lower pressure to be used for dispensing liquids and pastes.

Crimped tips are ideal for use with solvents and solvent based adhesives for a more secure attachment of needle to hub, The bond between hub and steel tube being crimped and not glued is more robust.

Part ID: TS27-1/4
Materials: Polypropylene Hub/ Stainless Steel Tube
Colour: Grey
Inner Diameter: 0.008" - 0.21mm
Outer Diameter: 0.016" - 0.41mm
Tube Length: 0.25" - 6.35mm
Maximum Pressure: 100 PSI
Details: Industrial Grade, Silicone Free, Chloride Free
Commodity Code: 84249020
Brand: TSI
Pack Size: 50

---

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

---

• Part ID: TS27-1/2
• Materials: Polypropylene Hub/ Stainless Steel Tube Colour: Grey
• Inner Diameter: 0.008" - 0.21mm
• Outer Diameter: 0.016" - 0.410 mm
• Tube Length: 0.25" - 6.35 mm
• Tip Details: Industrial grade, Silicone Free

General purpose TS tips are designed to work with all luer lock and luer slip syringe barrels and fittings. They are fully compatible with most fluids, adhesives, solvents and chemicals. For Cyanoacrylate adhesives, we recommend using our Teflon, Teflon Lined or Polypro tips. For high viscosity pastes, sealants, silicones, mastics, solder pastes and compounds, we suggest the use of our tapered tips.

General purpose TS tips are safe for use up to 100 psi pressure. These tips are precision manufactured for  industrial use.

General purpose TS tips are certified silicone-free components and will not contaminate any fluids that are dispensed from them.