Non-Timed Pneumatic Dispenser 0-100 psi Regulator & Gauge

Floor mounted pneumatic adhesive and paste syringe dispenser. With an adjustable 0-100 psi regulator. Three way air valve for quick shut-off prevents fluid oozing when pedal released. Operator controls deposit output. Press the pedal for flow, lift off to stop.

Suited to controlled dispensing of most medium to high viscosity pastes and fluids, sealants, RTV, grease, gels, epoxies, mastics, sealants and potting compounds. Supplied with a syringe adapter assembly with 6ft long air hose, barrels, pistons and needle tips. Please select the syringe size starter kit to ship with the dispenser.

As this systems is fully pneumatic, it is suitable for use in hazardous and explosive environments. Supplied with airline hose. Also available dispenser without vacuum suck-back (Model TS924) which is for pastes only.

---

Timer: None
Input Pressure: Up to 100 psi
Size: 200 x 127 x 127 mm
Weight: 1.82kg (4lb)
Input Voltage: None (pneumatic only)
Output Pressure: Up to 100 psi
Cycle Rate: None (manual operation only)
Timing Tolerances: n/a
Meets or Exceeds: CE
Commodity Code: 84249020
Brand: TSI
Warranty: 1 Year

---

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

---

---

• Timer: None
• Output Pressure: Up to 100 psi
• Input Pressure: Up to 100 psi
• Size: 200 x 127 x 127 mm
• Weight: 1.82kg (4lb)
• Input Voltage: None (pneumatic only)
• Warranty: 1 Year
• Cycle Rate: None (manual only)
• Timing Tolerances: n/a
• Meets or Exceeds: CE

This product is shipped with the following:

1 x TS924V footvalve dispenser 1 x airline hose with 1/4" male thread connect 1 x 30cc clear barrel (part code 7300LL1NPK) 1 x 30cc white wiper piston (part code 730009WPK) 1 x 30cc red end cap (part code 71000CRPK) 1 x black tip cap (part code 7015LLBPK) 5 x assorted dispensing tips

Order part code TS924 if a vacuum suck-back is not required. Do not use this product with watery liquids as it is floor mounted and more suited to dispensing pastes. Use TS250 dispenser for watery liquids. Suitable materials proven to work with this systems include solder pastes, solder fluxes, PVA glues, RTV's, silicones, sealants, greases, SMT adhesives, pre-mixed and frozen epoxies, single part epoxies, gels, adhesives and other assembly fluids.