A syringe gun is a hand operated manual dispenser that uses industrial syringe barrels and precision tips to apply controlled beads and dots of pastes, gels, glues, adhesives, silicones, greases and other assembly fluids. You load the syringe barrel with your material, insert a wiper piston, attach and tip and hold the gun one-handed. When you squeeze the trigger, the rod moves down against the piston forcing out the material. The luer lock tip controls the deposit without oozing or drooling.
Manual syringe gun dispensers are simple and cost-effective devices for use with standard industrial syringe barrels. Perfect for lower volume product assembly, product re-work, repair work and remote field work. Syringe guns offer a dispensing solution for applying most low, medium and high viscosity materials.
A portable and lightweight manual dispenser adding control and consistency. With a 7:1 ratio mechanical leverage on the rod for effortless trigger movement. The rod moves 3mm (1/8 Inch) once pressed to provide controlled deposits.Push the top button to release the plunger rod and pull it back ready for barrel attachment. Simple bayonet twist on/ twist off barrel secure connection. Barrels are held to the syringe gun by the flange. This ensures the barrel does not break or move under constant use of hand pressure.
This syringe gun dispenser is shipped with the following parts:
10 x 55cc Barrels filled with PVA Glue
50 x 14, 16, 18, 20, 22 Gauge Green Smooth Flow Tapered Tips
Specifications:
Gun Length: 215.0mm
Maximum Thrust: 1.5kN
Handle Material: Glass Filled Nylon
Frame Material: Glass Filled Nylon
Tool Component Approvals: REACH
Cartridge Capacity: 55mL (55cc)
Mechanical Advantage Ratio: 7:1
Viscosity: Low/Medium
Standard Body Colour: Red
Commodity Code: 73269098
Materials: Polypropylene/ Reinforced Nylon
Warranty: 1 Year
Brand: Adhesive Dispensing Ltd
Weight: 0.1kg/0.2lbs
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
- Materials: Polypro/ Nylon
- Capacity: 55cc or 55ml
- Length: 225mm
- Height: 135mm
- Weight: 110 grams
- Colour: Red Handle/ White Trigger
- Warranty: 1 Year
This product is shipped with the following: 10 x 55cc barrels, pistons and caps filled with PVA glue, 50 x assorted luer lock dispense tips
Order part code TS730SG if a the gun is required without a kit..Do not use this product with Cyanoacrylate adhesives, rapid cure two-component epoxies or aggressive solvents. Suitable materials proven to work with this gun include solder pastes, solder fluxes, PVA glues, RTV's, silicones, sealants, greases, SMT adhesives, pre-mixed and frozen epoxies, single part epoxies, gels, adhesives, primers, inks and other assembly fluids.
|
