Syringe Gun dispensers are designed for the controlled application of pastes, gels, adhesives and fluids. A cost effective quality made syringe dispensing gun using standard 55cc/ 55ml size industrial syringe barrels. Ideal for remote dispensing, low volume production, re-work or repair work.
Syringe Guns offer a low cost dispensing solution for most medium to high viscosity pastes, gels, silicones, greases and other liquids. A portable and lightweight manual dispenser for applying most fluids. A 7:1 ratio leverage for effortless trigger movement. The rod moves 3mm (1/8") once pressed to provide repeat deposits without drips or ooze.
Push the button to release plunger rod. Simple bayonet twist on/ twist off barrel attachment.
Ideal for applying solder paste, solder flux, RTV, silicones, sealants, gels, greases, compounds, PVA glues and other liquids. Each Syringe Gun kit includes the 55cc manual hand gun, (20) 55cc dispensing reservoirs with 55cc pistons, (20) storage end caps, (20) tip caps, (50) assorted dispensing tips.
Barrels are attached to the syringe gun using wide flanges. This ensures the barrel does not break under constant use or hand pressure. This 55ml gun is also available conveniently supplied complete with our full component kit.
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
- Materials: Polypro/ Nylon
- Capacity: 55cc or 55ml
- Length: 175mm
- Height: 135mm
- Weight: 110 grams
- Colour: Red Handle/ White Trigger
- Warranty: 1 Year
This product is shipped with the following: 20 x 55cc clear barrel (part code 7550LL1NPK) 20 x 55cc white wiper piston (part code 730009WPK) 20 x 55cc red end cap (part code 73000CRPK) 20 x black tip cap (part code 7015LLBPK) 50 x assorted dispense tips
Order part code TS755SG if a the gun is required without a kit..Do not use this product with Cyanoacrylate adhesives, rapid cure two-component epoxies or aggressive solvents. Suitable materials proven to work with this gun include solder pastes, solder fluxes, PVA glues, RTV's, silicones, sealants, greases, SMT adhesives, pre-mixed and frozen epoxies, single part epoxies, gels, adhesives, primers, inks and other assembly fluids.
|
