Syringe Gun dispensers are designed for the controlled application of pastes, gels, adhesives and fluids. A cost effective quality made syringe dispensing gun for use with standard 10cc/ 10ml size syringe barrels. Ideal for low volume production, out in the field, re-work or repair work.
Syringeguns offer a low cost dispensing solution for most medium to high viscosity pastes, gels, silicones, greases and other liquids. A portable and lightweight manual dispenser for applying most fluids. A 7:1 ratio leverage for effortless trigger movement. The rod moves 3mm (1/8") once pressed to provide repeat deposits without drips or ooze.
Push the button to release plunger rod. Simple bayonet twist on/ twist off barrel attachment. Ideal for applying solder paste, solder flux, RTV, silicones, sealants, gels, greases, compounds, PVA glues and many other liquids/ pastes.
Each Syringe Gun includes the 10ml manual hand gun, (1) dispensing reservoir with piston, (1) storage end and tip caps, (5) dispensing tip. Barrels are attached to the syringe gun using wide flanges. This ensures the barrel does not break under constant use or hand pressure. This 10ml gun is also available conveniently supplied complete with our full component kit.
Materials: Polypro/ Nylon
Capacity: 10cc or 10ml
Length: 175mm
Height: 135mm
Weight: 110 grams
Warranty: 1 Year
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
- Materials: Polypro/ Nylon
- Capacity: 10cc or 10ml
- Length: 175mm
- Height: 135mm
- Weight: 110 grams
- Colour: Blue Handle/ White Trigger
- Warranty: 1 Year
This product is shipped with the following:
1 x 10cc clear barrel
1 x 10cc white wiper piston
1 x 10cc red end cap
1 x black tip cap
5 x 18 gauge tapered tip
Order part code TS710SG-KIT if a full component kit is required with the gun.Do not use this product with Cyanoacrylate adhesives, rapid cure two-component epoxies or aggressive solvents. Suitable materials proven to work with this gun include solder pastes, solder fluxes, PVA glues, RTV's, silicones, sealants, greases, SMT adhesives, pre-mixed and frozen epoxies, single part epoxies, gels, adhesives, primers, inks and other assembly fluids.
|
