A 10cc Syringe Gun dispenser with black opaque barrels for dispensing UV cure adhesives.

Our Syringe Gun dispensers are designed for the controlled application of pastes, gels, adhesives and fluids. A cost effective quality made syringe dispensing gun using standard 10cc/ 10ml size industrial syringe barrels. Ideal for remote dispensing, low volume production, re-work or repair work.

Syringe Guns offer a low cost dispensing solution for most medium to high viscosity pastes, gels, silicones, greases and other liquids. A portable and lightweight manual dispenser for applying most fluids. A 7:1 ratio leverage for effortless trigger movement. The rod moves 3mm (1/8") once pressed to provide repeat deposits without drips or ooze.

Push the button to release plunger rod. Simple bayonet twist on/ twist off barrel attachment. This kit is set up for dispensing UV cure adhesives and includes black UV syringe barrels and UV block tips to prevent the adhesive from the affects of UV light. Each Syringe Gun kit includes the 10ml manual hand gun, (50) 10ml black dispensing reservoir with 10ml rubber pistons, (50) storage end caps, (50) tip caps, (100) assorted dispensing tips .

Barrels are attached to the syringe gun using wide flanges. This ensures the barrel does not break under constant use or hand pressure.

---

This product is shipped with the following:

50 x 10cc black barrels
50 x 10cc white wiper pistons
50 x 10cc red end caps
50 x black tip caps
20 x 18GA smooth flow tapered tip green (part code TTN18)
20 x 22GA smooth flow tapered tip blue (part code TTN22)
10 x 19GA crimped TS tip brown opaque hub 1/2" long (part code TS19-1/2)
10 x 21GA crimped TS tip green opaque hub 1/2" long (part code TS21-1/2)
20 x 23GA crimped TS tip blue opaque hub 1/4" long (part code TS23-1/4)
20 x 26GA crimped TS tip beige opaque hub 1/2" long (part code TS26-1/2)

---

Order part code TS710SG if a gun is required without the kit. Do not use this product with Cyanoacrylate adhesives, rapid cure two-component epoxies or aggressive chemicals. Suitable materials proven to work with this gun include UV adhesive, solder pastes, solder fluxes, PVA glues, RTV's, silicones, sealants, greases, SMT adhesives, pre-mixed and frozen epoxies, single part epoxies, gels, adhesives, primers, inks and other assembly fluids.

---

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

---

• Materials: Polypro/ Nylon
• Capacity: 10cc or 10ml
• Length: 175mm
• Height: 135mm
• Weight: 110 grams
• Colour: Red Handle/ White Trigger
• Warranty: 1 Year

This product is shipped with the following: 50 x 10cc black barrel (part code 7100LL1BPK) 50 x 10cc white wiper piston (part code 710009WPK) 50 x 10cc red end cap (part code 71000CRPK) 50 x black tip cap (part code 7015LLBPK) 100 x various size dispense tips

Order part code TS710SG if a gun is required without the kit..Do not use this product with Cyanoacrylate adhesives, rapid cure two-component epoxies or aggressive solvents. Suitable materials proven to work with this gun include UV adhesive, solder pastes, solder fluxes, PVA glues, RTV's, silicones, sealants, greases, SMT adhesives, pre-mixed and frozen epoxies, single part epoxies, gels, adhesives, primers, inks and other assembly fluids.