The TS5600 Series dispense valves accurately control the application of most low to medium viscosity fluids without drips. The unique seal-less design incorporates an inert polymer diaphragm that isolates the actuator from the valve.

The adjustable open/close stroke 0.13 to 0.64 mm (0.005" to 0.025") allows for a very fast response with positive shutoff. Wetted components are made of inert plastic materials. Takes a direct feed from any pressure pot, cartridge or syringe and includes a selection of flexible fluid line tubing and connectors. Valve open time can be as short as 15 milliseconds.

Specifications
MPN: TS5621HD
Wetted Materials: Delrin/ Polypropylene
Size: 61mm L x 24mm Dia.
Weight: 59g (0.13lb)
Viscosity Range: 1 - 50,000 CPS
Repeatability: +/-0.30%
Cycle Rate: Up to 500 cycles/ minute
Flow Rate (water): 3432ml/minute @ 100 psi
Min Shot Size: 0.0075 cc/ ml
Max Fluid Pressure: 70 psi ( 5 Bar)
Activation Pressure: 70 psi (4.8 bar) minimum
Material Inlet: 1/4-28 UNF
Material Outlet: 1/4-28 UNF
Mounting: 10-32 UNF
Warranty: 1 Year
Commodity Code: 84248940
Brand: TSI

---

Model TS5621HD with Delrin polymer wetted parts is used for dispensing UV cure, anaerobics and fluxes. Simple to use with any pneumatic dispenser/ controller. Fluid housing is in FDA-compliant Delrin for most dispensing applications.

A UHMW version is available for chemical compatibility and a Teflon version for Cyanoacrylates. A stainless steel version with optimized internal fluid route is especially dedicated to dispense UV-cure adhesives, resins and lacquers used in the manufacture of DVDs and CDs. A hand-held actuated valve is also available.

---

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

---

• Part ID: TS5621HD
• Materials: Delrin, Teflon
• Size: 61mm L x 24mm Dia.
• Weight: 59g (0.13lb)
• Viscosity Range: 1 - 50,000 CPS
• Repeatability: �0.30%
• Cycle Rate: Up to 500 cycles/ minute
• Flow Rate (water): 3432ml/minute @ 70 psi
• Min Shot Size: 0.0075 cc/ ml
• Max Fluid Pressure: 70 psi ( 5 Bar)
• Activation Pressure: 70 psi (4.8 bar) minimum
• Material Inlet: 1/4-28 UNF
• Material Outlet: 1/8 NPT
• Mounting: 10-32 UNF
• Warranty: 1 Year

Items are shipped by UPS tracked.

The TS5621HD requires no regular maintenance other than the possible replacement of the diaphragm disc after time. This is a low cost replacement part. Typical Applications Diaphragm valves are used for many varied assembly and production processes where controlled deposits of low to medium viscosity liquids need to be applied. Common applications include:- Dots and beads of UV Cure Dots and beads of solvents Dots and beads of single part epoxies Dots and beads of primers Dots and beads of PVA glues Potting of components Deposits of liquid fluxes Dots and beads of threadlockers General adhesive application What's Included? The TS5621HD valve is supplied with a starter kit. The parcel will arrive with:- 1 x TS5621HD valve 1 x clear luer lock fluid line 1 x black luer lock fluid line 5 x assorted dispense tips 1 x tip cap seal 1 x user guide