Rotary valves use a rotary feed screw (auger) to dispense fluid with a positive displacement action, allowing for ultra-precise control of the dispensing process. The unique design ensures that material is constantly present at the feed screw inlet, while the controlled rotation of the feed screw moves the material from the feed to the discharge point. Discrete control of the forward and reverse rotations of the feed screw controls the amount of material discharged. The unique DMP (Disposable Material Path) valve (TS5000DMP) offers a choice of 3 different feed screw sizes (6, 8 and 16-pitch), all made of Delrin.

The DMP Valve has a hinged doorway that opens easily so the disposable auger can be removed and replaced within seconds, while the line is still in operation, significantly reducing downtime and waste. This version is a left hinge openings makes the valve suitable for mounting on most automated systems. This version is the slim body version. This valve is suited to dispensing solder pastes, die attach, SMT adhesives, thermal compounds, pre-mixed and frozen epoxies, chip encapsulation and dam writing. Control the TS5000DMP valves with the TS500R digital controller.

---

Part ID: TS5000DMP-DCX-SL
Size: 149mm L x 90mm W
Weight: 350 g
Wetted Parts: Delrin, Fluorocarbon Rubber, Nylon
Viscosity Range: Min 30k CPS - 1.3 Million CPS
Min Shot Size: 0.020" (0.508mm) 0.00003cc
Repeatability: +/- 0.20%
Cycles Per Minute Max: 240
Max Fluid Pressure: 30 psi ( 2.1 Bar)
Material Inlet: Female Luer Lock
Material Outlet: Male Luer Lock
Valve Mounting: 1.0 Inch Wide Channel
Commodity Code: 84248940
Brand: Techcon
Warranty: 1 Year

---

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

---

• Part ID: TS5000DMP-DCX-SL Size: 149mm L x 90mm W
• Weight: 350g
• Wetted Parts: Delrin, Fluorocarbon Rubber, Nylon
• Viscosity Range: 30 - 1.3 Million CPS
• Min Shot Size: 1.5x10-5
• Repeatability: +/- 0.20%
• Cycles Per Minute Max: 240
• Max Fluid Pressure: 30 psi ( 2.1 Bar)
• Material Inlet: Female Luer Lock
• Material Outlet: Male Luer Lock
• Valve Mounting: 1.0" Wide Channel
• On/Off Pressure: 50 psi (3.4 Bar) Minimum

Auger valves are used for many varied assembly and production processes where controlled deposits of medium to high viscosity materials need to be applied. Common applications include:-
 
Dots and beads of solder pastes  
Dots and beads of flux pastes
Dots and beads of epoxies
Dots and beads of die attach
Dots and beads of heat sinks
Potting of components
General adhesive applications