Precision moulded 4" long standard nozzle x 3/32" (0.094") orifice. 1/4" NPT thread to fit all cartridges and TS941 spool valves. Nozzle can be cut down if required. If using with pre-filled sealant and silicone cartridge tubes that feature an external nozzle thread, use our special nozzle adapter fitting. This will provide a leak free connection to the range of nozzles.

Natural medium density polyethylene (MDPE) material. Supplied in sealed packs of 1000 nozzles.

---

Part ID: TS490-1000
Material: Polyethylene
Colour: Natural
ID: 3/32" (2.38mm)
Length: 4" (101.6mm)
Connection: 1/4" NPT
Details: Industrial grade, Silicone Free
Commodity Code: 84679200

---

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

---

• Part ID: TS490
• Material: Polyethylene
• Colour: Natural
• ID: 3/32" (2.38mm)
• Length: 4" (101.6mm)
• Connection: 1/4" NPT
• Details: Industrial grade, Silicone Free

Nozzles are designed to work with all industry standard industrial cartridges. Part TSD931-296 is required if using with pre-filled silicone and sealant tubes that feature and external thread nipple to cut. Nozzles are fully compatible with most fluids, adhesives, pastes and gels and useful for high viscosity pastes, sealants, silicones, mastics, solder pastes and compounds. All nozzles are safe for use up to 100 psi pressure. Nozzles are not for medical use but are precision manufactured for industrial use. All nozzles are certified silicone-free to prevent contamination of any liquids dispensed from them.

Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.