Precision Crimped Opaque PE Hub to Stainless Steel Cannula - 22 Gauge 0.5" Long Black
The TS Series dispensing tips offer a variety of dispensing performance and flexibility options. Stainless steel tubing is cut to precise lengths and ground to be burr-free. Cut tubing is crimped into aluminium locking insert, then moulded into polyethylene hubs.
Moulded hub colours correspond to gauge size. All TS Series tips secure to syringe barrels and correspond to the luer lock specification.
Tips are colour coded for gauge size. The hub is opaque and does not allow light to affect the adhesive being dispensed. And crimped rather than a glued construction ensures these tips are not as quickly affected by solvents.
The tip uses a slightly tapered internal design where the shaft joins the hub to ease fluid flow and reduce restriction. This allows for a lower pressure to be used for dispensing liquids and pastes.
Part ID: TS22-1/2
Materials: Polypropylene/ Stainless Steel
Hub Colour: Black
Inner Diameter: 0.016" - 0.406 mm
Outer Diameter: 0.028" - 0.710 mm
Tube Length: 0.5" - 12.70 mm
Tip
Details: Industrial grade, Silicone Free
Commodity Code: 39269097
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
- Part ID: TS22-1/2
- Materials: Polypropylene/ Stainless Steel
- Hub Colour: Black
- Inner Diameter: 0.016" - 0.406 mm
- Outer Diameter: 0.028" - 0.710 mm
- Tube Length: 0.5" - 12.50 mm
- Tip Details: Industrial grade, Silicone Free
General purpose TS tips are designed to work with all luer lock and luer slip syringe barrels and fittings. They are fully compatible with most fluids, adhesives, solvents and chemicals. For Cyanoacrylate adhesives, we recommend using our Teflon, Teflon Lined or Polypro tips. For high viscosity pastes, sealants, silicones, mastics, solder pastes and compounds, we suggest the use of our tapered tips.
General purpose TS tips are safe for use up to 100 psi pressure. These Tips are not for medical use but are precision manufactured for industrial use.
General purpose TS tips are certified silicone-free components and will not contaminate any fluids that are dispensed from them.
|
