High Interference Cartridge Plunger

A tighter fitting cartridge plunger that prevents even the thinnest materials from leaking out of the cartridge. This plunger is also suited for thick materials when a complete air tight seal is required. Natural in colour and made of low density polyethylene (LDPE). For use with all 2.5oz, 6oz, 8oz and 12oz size dispensing cartridges. It provides tight wiper action for most materials, adhesives, liquids, pastes and gels.

These plungers are supplied in sealed packs of 250 with batch codes. All cartridge and plunger components are certified silicone free materials.

---

Part ID: TS1WP-250
Material: Polyethylene (LDPE)
Size: 2.5, 6, 8 and 12 oz
Colour: Natural
Outer Diameter: 1.59" (40.38mm)
Commodity Tariff Code: 84679200
Brand: TSI
Pack Size: 250

---

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

---

• Part ID: TS1WP
• Material: Polyethylene
• Size: 2.5, 6, 8 and 12 oz
• Colour: Natural
• Outer Diameter: 2.57"

Cartridges are designed for use with pneumatic dispensing equipment or manual guns. They are thick walled and so designed for high pressures. The internal bore is zero draft meaning there is no taper. This ensures the wiper plunger inside moves down without restriction to improve dispense performance.

Use these cartridges with pastes, adhesives, solvents, epoxies, RTVs, silicones, PVAs, inks and gels. These products are safe for use up to 100 psi pressure. Cartridges are precision manufactured for industrial applications. Components are certified silicone-free components and will not contaminate any fluids that are dispensed from them. This product will ship by tracked courier.

Suitable for...
	Adhesives
	Silicone's
	Epoxies
	Primers
	Solvents
	Lubricants
	Pastes