Dispensing tip with long flexible translucent clear tube and threaded luer lock colour coded hub for secure attachment to syringe barrels or dispense valves. Ideal for use with Cyanoacrylates and other low viscosity liquids as adhesives will not stick to the tube or clog. The clear shaft allows fluid flow to be seen. A flexible 18 gauge pink PTFE tip tube length of 0.5" (12.7mm).
Part ID: TF18-1/2
Material: Polypropylene/ Teflon PTFE
Hub Colour: Pink
ID: 0.042" - 1.067mm
OD: 0.054" - 1.372mm
Tube Length: 0.50" - 12.70 mm
Total Tip Length: 1 3/16" - 30.0 mm
Maximum Pressure: 100 PSI
Details: Industrial Grade, Silicone Free
Commodity Code: 39269097
Pack Size: 50
Threaded polypropylene hub with PTFE shaft. Ideal for use with cyanoacrylates, solvents and other low to medium viscosity fluids. Clear 'see-thru' shaft below the colour coded hub allows fluid flow to be viewed during dispensing. Supplied in sealed packs of 50. Bulk packs of 1000 are available on request.
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
- Part ID: TF18-1/2
- Material: Polypropylene/ Teflon�
- Hub Colour: Pink
- ID: 0.042" - 1.067mm
- OD: 0.054" - 1.372mm
- Length: 0.50" - 12.70 mm
- Details: Industrial grade, Silicone Free
Suitable for...
Adhesives
Cyanoacrylates
Anaerobics
Oils
Primers
Epoxies
Primers
Solvents
Lubricants
Teflon tips are designed to work with all luer lock and luer slip syringe barrels and fittings. They are fully compatible with most fluids, adhesives, pastes and gels and recommended for dispensing reactive fluids such as Cyanoacrylates.
All tips are safe for use up to 100 psi pressure. These tips are not for medical use but are precision manufactured for industrial use. Tips are certified silicone-free components to ensure they do not contaminate any fluids or adhesives that are dispensed from them. Tips are shipped by UPS.
|
