Precision Crimped Opaque PE Hub to Stainless Steel Cannula - 22 Gauge 0.5" Long Blue
The TES Series dispensing tips offer a variety of dispensing performance and flexibility options. Stainless steel tubing is cut to precise lengths and ground to be burr-free. Cut tubing is crimped into aluminium locking insert, then moulded into polypropylene hubs.
Moulded hub colours correspond to gauge size. All TES Series tips secure to syringe barrels and correspond to the luer lock specification.
Tips are colour coded for gauge size. The hub is opaque and does not allow light to affect the adhesive being dispensed. And crimped rather than a glued construction ensures these tips are not as quickly affected by use of solvents.
The tip uses a slightly tapered internal design where the shaft joins the hub to ease fluid flow and reduce restriction. This allows for a lower pressure to be used for dispensing liquids and pastes. Supplied in a sealed box of 50 tips.
Part ID: TES22050
Materials: Polypropylene/ Stainless Steel
Hub Colour: Blue
Inner Diameter: 0.016" - 0.41 mm
Outer Diameter: 0.028" - 0.71 mm
Tube Length: 0.5" - 12.70 mm
Tip
Details: Industrial Grade, Silicone Free. Chloride Free
Commodity Code: 90289090
Brand: Adhesive Dispensing Ltd
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
- Part ID: TES22050
- Materials: Polypropylene Hub/ Stainless Steel Tube Colour: Blue
- Inner Diameter: 0.016" - 0.41mm
- Outer Diameter: 0.028" - 0.71mm
- Tube Length: 0.5" - 12.70 mm
- Tip Details: Industrial grade, Silicone Free
General purpose TES tips are designed to work with all luer lock and luer slip syringe barrels and fittings. They are fully compatible with most fluids, adhesives, solvents and chemicals. For Cyanoacrylate adhesives, we recommend using our Teflon, Teflon Lined or Polypro tips. For high viscosity pastes, sealants, silicones, mastics, solder pastes and compounds, we suggest the use of our tapered tips.
General purpose TES tips are safe for use up to 100 psi pressure. These Tips are not for medical use but are precision manufactured for industrial use.
General purpose TES tips are certified silicone-free components and will not contaminate any fluids that are dispensed from them.
|
