Hand operated manual syringe assembly with luer lock tip attachment supplied with stainless steel blunt end dispense tips 1.5" long. A multi purpose evaluation pack of clear 30ml/ 30cc manual syringes with luer lock dispensing tips. Clear syringe barrel includes plunger rod and rubber piston. Luer lock twist-on tip attachment. Tips are 1.5" long blunt end wide bore 14, 15 and 16 gauge. Includes tip cap seals.

Luer lock syringe for twist on attachment of needle tips. These syringes are industry compliant low friction polypropylene. Suited for use with most fluids, adhesives, solvents, primers, inks, paints, lubricants and activators. Clear barrel without graduations. AD series general purpose tips are designed to work with all luer lock and luer slip syringe barrels and fittings. They are fully compatible with most fluids, adhesives, solvents and chemicals.

Tips are colour coded for gauge size. The tip features a slightly rounded internal design where the shaft meets the hub to improve fluid flow and reduce flow restriction. This allows for a lower pressure to be used for dispensing of liquids and pastes. Please note that these items are shipped in sealed and labelled packs direct from stock.

---

Part ID: SA7994
Materials: Polypropylene/ Stainless Steel
Syringe Length: 4.58" - 116.33mm
Syringe Outer Diameter: 1.03" - 26.16mm
Syringe Inner Diameter: 0.94" - 23.88mm
Needle Tip Tube Length: 0.50" (12.5mm)
Connection: Luer Lock
Commodity Code: 39269097

---

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

---

• Part ID: SA7994
• Materials: Polypropylene/ Stainless Steel
• Syringe Length: 4.58" - 116.33mm
• Syringe Outer Diameter: 1.03" - 26.16mm
• Syringe Inner Diameter: 0.94" - 23.88mm
• Needle Tip Tube Length: 0.50" (12.5mm)
• Connection: Luer Lock

The kit includes: - Part MS430LL-1 30ml or 30cc size x 2 Part AD714050 14 GA tip 1/2" long Olive 1.55mm ID x 2 Part AD715050 15 GA tip 1/2" long Amber 1.37mm ID x 2 Part AD716050 16 GA tip 1/2" long Grey 1.19mm ID x 2

Dispensing tips and syringe barrels are designed to work with most low, medium and high viscosity fluids, adhesives, inks, pastes, gels and lubricants. Syringe barrels are moulded in high density plastics and have much thicker walls than a medical grade syringe. This design ensures syringe barrels do not come loose from the tip. The luer lock tip attachment offers secure dispensing under pressure.

Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.