 |
 |
 |
|
AD2005 Semi Rigid is a two component room temperature curing, black coloured, odourless, thixotropic polyurethane adhesive mainly orientated to auto body shop and makes possible fast and easy repairs on most plastics. This adhesive tube is supplied with (5) static mixer nozzles in the box.
PRODUCT BENEFITS:
- Fast hardening time
- Excellent grinding properties
- High strength
- Easy to apply
- Over pain table
- No marking through
- Suitable for many different materials
AREA OF APPLICATION:
AD2005 is used to repair plastic parts like bumpers, lights, front grills, blinkers, side protection, etc. whenever rigid parts are damaged. Suitable substrates are: all thermosetting plastics and most of all thermoplastic such as ABS, PC, PA, PPO, PP, PP+EPDM, SAN.
AD2005 also has very good adhesion on many different material as metal, wood, concrete, ceramics and glass.
PRODUCT APPLICATION:
AD2005 is available in two-component cartridges 50 ml 1:1 Ratio. Blending should be made through static mixer composed by a minimum of 16 elements.
TYPICAL REACTION PROPERTIES
10 gr of product at 20 C
Property Value
Open time 1 min
Bonding time 5 min
Fully cured time 240 min
Temperature of exothermic reaction 80 C
PRODUCT STORAGE:
AD2005 has a shelf life of 12 months from the initial production as long as it is stored in a cool and dry place, between +10 C and +25 C. Expiry date is indicated on the label. The cartridges have to be kept in a sealed plastic bag and protected from light and heating sources inside the original packaging. Once opened, the cartridges will last until the expiry date (as long as the above conditions are met).
NOTE: The information, and, in particular, the recommendations relating to the application and end-use of our products, are given in good faith based on Adhesive Dispensing Limited current knowledge and experience of the products when properly stored, handled and applied under normal conditions.
We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the users responsibility to determine suitability for the users purpose of any production method mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons against any hazards that may be involved in the handling and use thereof.
Adhesive Dispensing Ltd specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of our products. Adhesive Dispensing Ltd specifically disclaims any liability for consequential or incidental damages of any kind, including lost profits.
Users should always refer to the most recent issue of the Technical Data Sheet for the product concerned, copies of which will be supplied on request.
- Part ID: AD2005 Material: Rigid clear PU
- Colour: Black
- Pack Size: 50ml Dual Cartridge 1:1 Ratio
- Applications: Use with plastics
- Cure Time: 1 minute
- Shelf Life: 12 months
PRODUCT HANDLING CAUTIONS:
Adhesive Dispensing Ltd products are generally quite harmless to handle provided that certain precautions are normally taken when handling chemicals are observed. The uncured materials must not be allowed to come into contact with foodstuffs or food utensils, and measures should be taken to prevent the uncured materials from coming in contact with the skin, since people with particularly sensitive skin may be affected. The wearing of impervious rubber or plastic gloves will normally be necessary; likewise the use of eye protection. The skin should be thoroughly cleaned at the end of each working period by washing with soap and warm water. The use of solvents has to be avoided. Disposable paper should be used to dry the skin. Adequate ventilation of the working area is recommended. These precautions are described in greater detail in the Safety Data Sheet for the individual products and should be referred to for further information.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Fast Hardening Time
- Excellent grinding properties
- High strength
- Easy to apply
- Over pain table
- No marking through
- Suitable for many different material
|
|
|
|
|
|
|
|
|
