Cartridge reservoir in low density polyethylene (LDPE). 2.5 ounce/ 77cc ml size. Suitable for handling most materials including solvent based fluids. 1.69" outer diameter by 4.00" long. Suitable for use in cartridge guns or pressurised cartridge retainers and caps. Supplied in sealed packs of 50.

Disposable plastic cartridges are available in 2.5, 6, 8, 12, 20, 32 oz. (approximate metric value 75, 177, 237, 360, 600, 960cc) and 1/10th gallon capacities. In high-density natural polyethylene. All sizes feature a 1/4" NPT (6mm) female thread dispensing orifice for secure attachment of nozzles or 1/4" threaded fittings.

---

Part ID: TS25C-LD-50
Material: Low Density Polyethylene (LDPE)
Colour: Clear (Natural)
Capacity: 2.5oz (77cc)
Length: 4.00" (101.6mm)
OD: 1.69" (4.292mm)
ID: 1.59" (40.38mm)
Maximum Pressure: 100 PSI
Details: Industrial Grade Safe, Silicone Free
Commodity Code: 39269097
Brand: TSI

---

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

---

• Part ID: TS25C-LD-50
• Material: Low Density Polyethylene
• Colour: Clear (natural)
• Capacity: 2.5oz (75cc)
• Length: 4.00"
• OD: 1.69"
• Details: Industrial Grade Safe, Silicone Free

Cartridges are designed for use with pneumatic dispensing equipment or manual guns. They are thick walled and so designed for high pressures. The internal bore is zero draft meaning there is no taper. This ensures the wiper plunger inside moves down without restriction to improve dispense performance.

Use these cartridges with pastes, adhesives, solvents, epoxies, RTVs, silicones, PVAs, inks and gels. This range have 1/4" NPT end for screw on nozzle attachment. These products are safe for use up to 100 psi pressure. Precision manufactured for industrial applications.

Suitable for...
	Adhesives
	Silicone's
	Epoxies
	Primers
	Solvents
	Lubricants
	Pastes