 |
 |
 |
|
We supply syringe
barrels filled with a variety of specified materials. Each syringe
barrel is supplied filled with 30ml of DC 3140 clear RTV and includes cap
seals and a label on each barrel.
Receiving your
silicone in pre-filled syringe barrels eliminates costly time spent
transferring from cartridges or squeeze tubes, tins and tubs.
Material waste is eliminated. We supply this material air-free in ready to
dispense industrial grade dispensing syringes.
A filled 30cc size syringe
barrel containing Dow Corning 3140 clear RTV silicone. Syringe includes
tip cap, end cap and wiper piston. Ready for use on air powered
dispensers. Supplied with product Technical Data Sheet
(TDS),
Material Safety Data Sheet (MSDS) and
label identifying material, shelf life and batch code.
Supplied in sealed packs of 10 x 30ml barrels.
DC 3140 is a one-part flow-able silicone
coating and adhesive designed to provide long term coating against moisture and
atmospheric contaminants, especially where a solvent free RTV product is
required. Syringe barrels are industrial grade safe for use to 100 psi.
Filled syringe barrels
eliminate waste associated with toothpaste tubes and are easier to handle
than large 310ml cartridges. Syringe caps are supplied for re-sealing
the barrel after use. Save on labour time and
eliminate costly material waste by receiving pre-filled syringe barrels with RTV.
Use these 30cc filled syringe barrels with our air powered dispensers.
Translucent; 1 part - no mixing required;
moisture cure (RTV) - no oven
required;
Solvent-free - no ventilation required;
UV indicator for automated inspection;
cure system can be heat
accelerable for faster in-line processing;
Medium viscosity for moderate flow/fill/self-levelling after dispensing
process;
Mil Spec A-46146 QPL (qualified product listing);
UL-94V-1 flammability rating;
High elongation value for vibration/mechanical shock dampening and low
stress
Good flowability;
room temperature cure;
no added solvents;
UV indicator for inspection;
UL 94V-1 and Mil-A-46146
Sealing lids and housings where grooves or other configurations support a
flowable material or where limited flow is desired
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
- Technical Data Sheet
Translucent; 1 part - no mixing required;
Moisture cure (RTV) - no oven required; solvent-free - no ventilation required; - UV indicator for automated inspection; cure system can be heat accelerable for faster in-line processing;
- Medium viscosity for moderate flow/fill/self-leveling after dispensing process; Mil Spec A-46146 QPL (qualified product listing);
- UL-94V-1 flammability rating;
- High elongation value for vibration/mechanical shock dampening and low stress
- Good flowability; room temperature cure; no added solvents;
- UV indicator for inspection; UL 94V-1 and Mil-A-46146
- Sealing lids and housings where grooves or other configurations support a flowable material or where limited flow is desired
As with any adhesive or chemical, the MSDS and TDS should be read before use.
This product will ship with a courier to UK customers on a tracked delivery.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Complete with syringe barrel, piston, tip cap, end cap, tips Strong permanent bond
- Supplied ready for use
- Luer lock tip attachment
- Supplied in sealed packaging
|
|
|
|
|
|
|
|
|
