Cartridge
Sets for Two-Component Adhesives
AJ 600-01-10-01 is the dual cartridge system in a 600ml size
with a 1:1 mix ratio by volume. Main resin and hardener are stored in the two
chambers of the dual cartridge system and are then dispensed simultaneously
through the static mixer, where thorough mixing takes place. Plastic wiper
pistons are included. Use with bell mount static mixer nozzles (
MC, MCQ or MGQ Series).
The static mixer nozzles are available in different
sizes with different volumes and a variety of mixing elements. One of the main
benefits of the system is that not all of the contents of the cartridge have to
be mixed at a time. The cartridge can be easily sealed and stored for further
use, without the material curing. Packs include the cartridge, wiper pistons
and cap seals. Cartridges are compatible with dual cartridge guns.
Dual cartridges are supplied in packs of 50 and
include tip cap seal and threaded collar as well as 100 of the correct sized pistons.
Pistons are self-venting lip seal type. This allows the piston to be inserted after the adhesive has been put inside. The air escapes through the vent for easy piston insertion. The vent plug is then clicked shut to seal.
Part ID: AJ 600-01-10-01
Material: Polypropylene
Colour: White Natural
Size: 600ml (300ml + 300ml)
Ratio: 1:1 by volume
Length: 215mm
OD: 49.3mm x 2
Outlet: Bell Mouth Nozzle Attachment or Screw Nozzle
Details: Industrial Grade, Silicone Free
Commodity Code: 39269097
Brand: Sulzer Mixpac Medmix
Origin: GB
Adhesive Dispensing Ltd provide a wide range
of equipment options for dispensing almost all assembly fluids - from watery
liquids, solvents, primers and activators through to thick pastes, sealants,
silicones, gels and epoxies.
- Part ID: AJ 600-01-10-01 Material: Polypropylene
- Colour: White
- Size: 6 00ml (300ml + 300ml)
- Ratio: 1:1
- Outlet: Bell mouth nozzle attachment
- Details: Industrial grade, Silicone Free
Dual Cartridges are designed to work with most two part epoxies, silicones and other materials.
This 1:1 cartridge set can be used with the following dispensing guns. For a manual gun, use part code BG600-1. For a pneumatic gun, use part code CG600-1.
Dual cartridges are shipped by tracked courier.
|
