Cyanoacrylate primer enables the adhesion of difficult to bond substrates such as low energy plastics (polypropylene, polyethylene, silicon rubber and even PTFE). AC77 works by increasing the surface energy of the substrate to which it is applied, allowing all cyanoacrylates to bond the surfaces.
Product Overview
- Clear liquid primer to assist bonding of all cyanoacrylates
- Enables adhesion of difficult to bond substrates
- Contains zero, ozone hazardous solvents
- 1000ml Bulk Can
Directions For Use
1. Brush primer onto surfaces to be bonded.
2. Wait for the solvent carrier to evaporate (normally 10-30 seconds).
3. Apply appropriate Procure cyanoacrylate to one of the surfaces and assemble parts.
If the bond is Polypropylene to polypropylene, both surfaces should be primed.
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
