The mini mixer is a tool designed to quickly and efficiently mix all types of pre-filled Semkit and Techkit packages, regardless of viscosity.

The mini-mixer easily fits into any air or electric drill with a 1/4 Inch chuck and will work with both injection and barrier style packages. Use the mini-mixer to reduce fatigue and provide a more uniform mix than is possible by hand. The mini-mixer is tiny enough to fit into your shirt pocket, yet it will perform the same job as the larger industrial mixers costing hundreds of pounds. This is a tool that belongs in the toolbox of every serious mechanic.

Part Code: 209941
Material: Steel/ Aluminium
Commodity Code: 90289090
Origin: GB
Brand: Adhesive Dispensing Ltd

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

• General Use instructions:
• Please refer to manufacturer's Material Safety Data Sheet for handling the Semkit� or Techkit� before mixing.
• WEAR SAFETY GLASSES AND GLOVES WHILE MIXING AND DISPENSING.
• Prepare Semkit� Techkit� according to instructions accompanying the kit.
• Engage holes in dasher rod with drive pins on the fitting.
• Hold the Semkit� cartridge without squeezing and proceed to mix by slowly moving it up and down along the length of the dasher rod. Each stroke should extend from the neck of the cartridge to the plunger end of the cartridge.
• Remove the dasher rod from the spindle.
• Maintenance:
• Wipe clean all contaminants with approved cleaning agent dampened rag after each use of mixer.

This product is shipped via a courier service. Insurance is enhanced.

Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.