High quality low odour and low blooming/frosting cyanoacrylates are formulated for cosmetically critical applications. There is no irritant vapour so can be used in confined or poorly ventilated areas. Ideal for bonding black shiny surfaces, clear acrylics, electronics, jewellery. Use this low viscosity grade for close fitting parts. Produces rapid bond between a variety of materials including plastics, rubbers, metals, paper, card and leather.

This adhesive can be applied using our syringe barrel dispensers or direct from the larger bottles using our metering valves, controller and pressure pot. All CAs are shipped with TDS and SDS. This grade is suitable for bonding difficult substrates, absorbent and porous surfaces, e.g. paper, wood, cardboard and leather as well as superfast cure with plastics, metals, ceramics, and rubbers. Due to the surface insensitive nature of GB15, this grade also maintains a rapid fixture time on acidic surfaces such as wood, leather and dichromated metals. This low viscosity grade will bond plastics, rubbers, and elastomers e.g. EPDM.

---

Part ID: GB4303-50
Material: Ethyl
Bottle Size: 50 gram
Colour: Clear
Viscosity: 1000/1500 cps
Max Gap Fill: 0.2mm
Temp. Range: -55 to 82 C
Fixture Time: 20-60 seconds @ 20 C
Typical Strength: 5 to 28 N/mm2
Bonds: Card, Paper, Fabric, Plastic, Rubber, Metal

---

• Part ID: GB15
• Material: Ethyl
• Bottle Size: 50 gram
• Colour: Clear
• Viscosity: 1000 cps
• Max Gap Fill: 0.2mm
• Temp. Range: -55 to 82 C
• Fixture Time:20-60 seconds @ 20 C
• Typical Strength: 5 to 28 N/mm2
• Bonds: Card, Paper, Fabric, Plastic, Rubber, Metal

Safety Data Sheet

Materials should not be used without consulting the SDS, which contains full information regarding the use of this product, including Transport, Disposal, Toxicological, Exposure Controls, Accidental Release and First Aid measures essential to the safe use of this product.

Adhesives are shipped by tracked couriers.