High quality metal applicator. Syringe Gun dispensers are designed for the controlled application of pastes, gels, adhesives and fluids. A cost effective quality made syringe dispensing gun for use with standard 30cc/ 30ml size syringe barrels. Ideal for low volume production, re-work or repair work.
Syringe Guns offer a low cost dispensing solution for most medium to high viscosity pastes, gels, silicones, greases and other liquids. A portable and lightweight manual dispenser for applying most fluids. 10:1 ratio leverage for effortless trigger movement. This gun features an adjustable switch to set shot size.
Barrels are attached to the syringe gun using wide flanges. This ensures the barrel does not break under constant use or hand pressure. This 30ml gun is also available conveniently supplied complete with our full component kit.
Specifications: Weight: 0.3kg Gun Length: 175.0mm Maximum Thrust: 2.5kN Handle Material: Coated Steel Frame Material: Coated Steel Barrel Adapter: High Density Acetal Tool Component Approvals: REACH Cartridge Capacity: 30mL (30cc) Mechanical Advantage Ratio: 10:1 Viscosity: Low/Medium/High Standard Colour: Black Warranty: 1 Year Commodity Code: 84798997 Origin: USA
This product is shipped with the following:
1 x 30cc clear barrel
1 x 30cc white wiper piston
1 x 30cc orange end cap
1 x orange tip cap 3 x 18 gauge tapered tip
Do not
use this product with Cyanoacrylate adhesives, rapid cure two-component
epoxies or aggressive solvents. Suitable materials proven to work with
this gun include solder pastes, solder fluxes, PVA glues, RTV's,
silicones, sealants, greases, SMT adhesives, pre-mixed and frozen
epoxies, single part epoxies, gels, adhesives, primers, inks and other
assembly fluids
.
Guns are portable and can be used in a factory production or assembly department as well as for repair and re-work. Guns are commonly used in the field for repair or maintenance applications. Common applications include:-
Deposits of solder paste Deposits of solder flux Grease to lubricate bearings PVA glue to small furniture joints RTV to seal cases Silicone deposits and beads Gasket sealant and silicone repair Shots of roach insecticides General adhesive application
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
- Materials: Steel/ Nylon
- Capacity: 30cc or 30ml
- Length: 175mm
- Height: 135mm
- Weight: 150 grams
- Colour: Black
- Warranty: 1 Year
This product is shipped with the following:
1 x 30cc clear barrel (part code AD930-N)
1 x 30cc white wiper piston (part code AD930-WW)
1 x 30cc red end cap (part code AD930-ECO)
1 x black tip cap (part code AD900-ORTC)
3 x 18 gauge tapered tip (part code TTN18)
Order part code DG30-KIT if a full component kit is required. Do not use this product with Cyanoacrylate adhesives, rapid cure two-component epoxies or aggressive solvents. Suitable materials proven to work with this gun include solder pastes, solder fluxes, PVA glues, RTV's, silicones, sealants, greases, SMT adhesives, pre-mixed and frozen epoxies, single part epoxies, gels, adhesives, primers, inks and other assembly fluids.
|