![](/v/vspfiles/templates/140/images/DBox_Border_Left_Top.gif) |
![](/v/vspfiles/templates/140/images/clear1x1.gif) |
![](/v/vspfiles/templates/140/images/DBox_Border_Right_Top.gif) |
![](/v/vspfiles/templates/140/images/clear1x1.gif) |
ADV series barrels are the highest quality dispensing syringe barrels for use with pneumatic dispensers as well as manual applicators. These parts are silicone and chloride-free. The barrels are made from low friction polypropylene to ensure accuracy, repeatability and productivity. Barrels feature a double helix luer lock for secure twist-on dispense tip attachment. Supplied in sealed packs. Black colour for use with UV cure and light sensitive adhesives.
The rounded end design provides an easier flow path to reduce material back pressure. It adds a benefit for less air entrapment when filling. These products are superior performance and premium grade.
A universal polyethylene wiper piston is available that seals the material from air, provides a consistent wipe, protects against drawback and reduces fumes. Use a piston for thick pastes, gels or liquids to improve flow. Maximum operating pressure for all components is 100 psi (6.9bar). Supplied in a pack of 50 parts. Part Code: ADV810BB Material: High Density Polypropylene
Capacity: 10cc (10ml)
Length: 3.58" - 90.93mm
Outer Diameter: 0.72" - 18.36mm
Inner Diameter: 0.62" - 15.72mm
Colour: Black Maximum Pressure: 100 PSI Commodity HS Code: 39269097 Details: Silicone-Free, Industrial Grade
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
- Material: High Density Polypropylene
- Capacity: 10cc (10ml) volume
- Length: 3.58" - 90.93mm
- Weight (kg): 0.006
- Outer Diameter: 0.72" - 18.36mm
- Inner Diameter: 0.62" - 15.72mm
- Colour: Black
Syringe barrels are designed for use with pneumatic dispensing equipment or syringe guns. They are thick walled with wide flanges and so designed for high pressures. The internal bore is zero draft meaning there is no taper. This ensures the wiper piston inside moves down without restriction to improve dispense performance. Use these barrels with pastes, adhesives, solvents, epoxies, RTVs, silicones, PVAs, inks and gels. This range have luer lock ends for twist on tip attachment.
Barrels are shipped with every new dispenser and syringe gun that we supply. Barrels are moulded in high density plastics and have much thicker walls than a medical grade syringe. The internal bore has no taper and this ensures the wiper piston moves consistently down without restriction. The wide flanges at the top are for quick attachment to the air adapter assembly (to a dispenser) or to a manual syringe gun. This design ensures syringe barrels do not come loose or break under air pressures up to 100 psi. The luer lock tip attachment offers secure dispensing under high pressure.
This product will ship by tracked courier.
We recommend the use
of our 10ml size manual Syringe Gun to make controlled deposits and
beads.
![](http://www.adhesivedispensers.co.uk/Images/syringegun1.jpg)
For more accuracy, we
recommend using the TS250 digital timed syringe dispenser that is
supplied ready for use with this product. The TS250 is a pneumatic bench
top dispenser with timer control to make repeat deposits of this
material or continuous beads. It features a shot counter to show number
of deposits made and an LCD timer display. Supplied with a foot pedal,
power cord, airline kit, tip kit and user guide.
![](http://www.adhesivedispensers.co.uk/Images/dx350a31.jpg) Pistons have blades to wipe the adhesive, paste or liquid from inside the syringe barrel as they move down. The blades also act to stop liquids from going past them as they dispense. Once a syringe has liquid inside, insert the piston and push down on one side. This will allow air to escape and ensures the piston sits directly on the fluid without an air gap. When bottom filling using a barrel filler, the piston is pushed down and moves up as the liquid is fed into the syringe barrel. Pistons can provide a barrier seal for liquids placed inside. But for more protection when dispensing watery liquids and cyanoacrylate adhesives, use our filter trap in the airline adapter assembly to your syringe dispenser
|
|
![](/v/vspfiles/templates/140/images/clear1x1.gif) |
![](/v/vspfiles/templates/140/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/140/images/clear1x1.gif) |
![](/v/vspfiles/templates/140/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/140/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/140/images/clear1x1.gif) |
![](/v/vspfiles/templates/140/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/140/images/DBox_Border_Left_MidDiv.gif) |
![](/v/vspfiles/templates/140/images/clear1x1.gif) |
![](/v/vspfiles/templates/140/images/DBox_Border_Right_MidDiv.gif) |
![](/v/vspfiles/templates/140/images/clear1x1.gif) |
Features
- Silicone and chloride free plastics
- Industrial grade safe to 100 psi
- Resistant to aggressive fluids and solvents
- Wide flanges for secure air attachment
- Luer lock tip twist-on tip attachment
- Zero draft inner walls for piston wiper precision
|
|
![](/v/vspfiles/templates/140/images/clear1x1.gif) |
![](/v/vspfiles/templates/140/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/140/images/clear1x1.gif) |
![](/v/vspfiles/templates/140/images/DBox_Border_Right_Bottom.gif) |
|
![](/v/vspfiles/templates/140/images/clear1x1.gif) |
![](/v/vspfiles/templates/140/images/clear1x1.gif)
![](/v/vspfiles/templates/140/images/clear1x1.gif)
|