Pistons when used with syringe barrels ensure that the pressure is evenly spread across the fluid surface to provide consistent dispensing. Wiper seal pistons prevent dripping and eliminate material waste by wiping the syringe barrel wall clean as fluid is dispensed. Maximum operating pressure is 100psi (6.9 bar).

Wiper pistons are a tighter fit for use with low to medium viscosity fluids or with mechanical devices such as our manual syringe gun to help slow down leakage past the double wiping edges. Supplied in a sealed pack of 50 pistons direct from stock.

---

Material: Low Density Polyethylene
Colour: White Opaque
For Barrel Size: 10cc
Height: 12.00mm
Outer Diameter: 15.72mm
Maximum Pressure: 100 PSI
MPN: AD910-WW
Brand: Adhesive Dispensing Ltd
Commodity HS Code: 39269097
Details: Silicone-Free, Industrial Grade

---

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

---

• Material: Polyethylene
• Colour: White
• For Barrel Size: 10cc
• Height: 12.00mm
• Outer Diameter: 15.72mm

Pistons are made of plastic and have dual blades to wipe the adhesive, paste or liquid from inside the syringe barrel as they move down. The blades also act to stop liquids from going past them as they dispense. Once a syringe has liquid inside, insert the piston and push down on one side. This will allow air to escape and ensures the piston sits directly on the fluid without an air gap. When bottom filling using a barrel filler, the piston is pushed down and moves up as the liquid is fed into the syringe barrel.

This product will ship by tracked courier from stock.