Introducing the top-of-the-line 900 series premium grade dispensing syringe barrels from Adhesive Dispensing Ltd. These industrial barrels are specially designed for use with dispensing equipment, allowing you to accurately and efficiently dispense all types of assembly fluids - from watery liquids to thick pastes.

Our syringe barrels are made from low friction polypropylene, ensuring precision, consistency and productivity. And with their silicone and chloride-free composition, they are safe for use in any dispensing application. You can use them manually or with a pneumatic dispenser, making them a versatile choice for all your dispensing needs.

The double helix luer lock outlet featured in our barrels ensures a secure and leak-free attachment for your dispense tips. And to further enhance your dispensing process, we offer wiper pistons that eliminate waste and allow for precise control over deposits, as well as reducing material fumes. With a maximum operating pressure of 100 psi, these barrels can handle even the most demanding dispensing tasks.

Our syringe barrels come in a handy sealed pack, complete with a label and batch code for easy identification. And for your peace of mind, we offer a no-quibble guarantee against any faults or defects. Our amber tinted barrels are perfect for use with UV and light sensitive adhesives as it provides protection against UV visible light (up to 520nm).

Part Code: AD903-D-1000

Material Polypropylene (HDPP)
Capacity 3cc (3ml)
Length 2.96" - 75.18mm
Outer Diameter 0.45" - 11.41mm
Inner Diameter 0.38" - 9.58mm
Maximum Pressure: 100 PSI
Colour Amber (Tinted to 520nm)
Brand: Adhesive Dispensing Ltd
Commodity Code: 39269097
Pack Size: 1000

At Adhesive Dispensing Ltd, we are committed to providing you with the best equipment to meet your dispensing needs. With our range of syringe barrels and wiper pistons, you can be sure of accurate, efficient, and hassle-free dispensing every time. Trust in our premium products for all your adhesive dispensing needs.

---

• Material Polypropylene
• Capacity 3cc (3ml)
• Length 2.96" - 75.18mm
• Outer Diameter 0.46" - 11.56mm
• Inner Diameter 0.39" - 9.73mm
• Colour Amber

Syringe barrels are designed for use with pneumatic dispensing equipment or syringe guns. They are thick walled with wide flanges and so designed for high pressures. The internal bore is zero draft meaning there is no taper. This ensures the wiper piston inside moves down without restriction to improve dispense performance. Use these barrels with pastes, adhesives, solvents, epoxies, RTVs, silicones, PVAs, inks and gels. This range have luer lock ends for twist on tip attachment.

Barrels are shipped with every new dispenser and syringe gun that we supply. Barrels are moulded in high density plastics and have much thicker walls than a medical grade syringe. The internal bore has no taper and this ensures the wiper piston moves consistently down the barrel without restriction. The wide flanges at the top are for quick attachment to the air adapter assembly (to a dispenser) or to a manual syringe gun. This design ensures syringe barrels do not come loose or break under air pressures up to 100 psi. The luer lock tip attachment provides secure dispensing under high pressure.

Pistons have blades to wipe the adhesive, paste or liquid from inside the syringe barrel as they move down. The blades also act to stop liquids from going past them as they dispense. Once a syringe has liquid inside, insert the piston and push down on one side. This will allow air to escape and ensures the piston sits directly on the fluid without an air gap. When bottom filling using a barrel filler, the piston is pushed down and moves up as the liquid is fed into the syringe barrel. Pistons can provide a barrier seal for liquids placed inside. But for more protection when dispensing watery liquids and cyanoacrylate adhesives, use our filter trap in the airline adapter assembly to your syringe dispenser.