Our precision components provide safe and leak free fluid dispensing of pastes, gels, adhesives, epoxies and other assembly fluids. These useful bottles accept any dispense tip that attaches to the luer lock cap.
Flexible dispensing bottles for applying most low to medium viscosity fluids, fluxes, adhesives, primers, henna inks, PVA glues and coatings. All bottles feature a detachable cap with a luer lock hub. This cap allows the use of all standard tips, tapered tips and can also be used with a brush tip for coating or spreading fluids. Bottles are supplied in sealed packs of 10.
When dispensing thick pastes, gels, epoxies and compounds, please use our manual syringe guns. These bottles use any of our luer lock tips or tip caps (ordered separately).
The luer lock cap threads onto the 3/4 oz size bottle and accepts any luer lock type needle tips. Suitable for flux, solvents, adhesives, inks and solder mask. A low cost and simple dispensing solution for low viscosity liquids. Ten bottles and caps supplied in each bag ordered . Available from stock. Bottle cap can be sealed using our tip caps.
Part ID: AD75BC
Colour: Clear (Bottle), Black (Cap)
Capacity: 3/4oz (20cc/ml)
Cap to Bottle Connection: Threaded
Tip Connection: Male Luer Lock
Material: Low Density Polyethylene (LDPE) Bottle, Nylon Cap
Commodity Code: 39269097
Brand: Adhesive Dispensing Ltd
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
- 20ml (20cc) or 3/4 oz capacity
- Low density polyethylene body/ nylon cap
- Natural colour body/ black cap
- Male luer lock cap
- Silicone-free plastics
This bottle is non sterile. Bottles and caps are supplied in sealed packs with product label. All tips will attach to luer lock bottles by twisting on. Silicone-free means that the bottles will not contaminate any adhesive or fluid dispensed from them. Do not use this product with thick pastes, (consider our syringe guns). Typical fluids dispensed with these tips include glues, solvents, anaerobics, lubricants, gels, fluxes, epoxies, nks, PVAs, etc.
Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Adhesive Dispensing Ltd. do not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice.
|
