Syringe Gun dispensers are designed for the controlled application of pastes, gels, adhesives and fluids. A cost effective quality made syringe dispensing gun for use with standard 55cc/ 55ml size syringe barrels. Ideal for low volume production, re-work or repair work.
Syringe Guns offer a low cost dispensing solution for most medium to high viscosity pastes, gels, silicones, greases and other liquids. A portable and lightweight manual dispenser for applying most fluids. A 7:1 ratio leverage for effortless trigger movement. The rod moves 3mm (1/8") once pressed to provide repeat deposits without drips or ooze.
Barrels are attached to the syringe gun using wide flanges. This ensures the barrel does not break under constant use or hand pressure. This 30ml gun is also available conveniently supplied complete with our full component kit. All products ship direct from stock.
Materials: Polypro/ Nylon
Capacity: 55cc or 55ml
Length: 195mm (including rod)
Height: 125mm
Weight: 110 grams (without barrel)
Colour: Grey Handle/ Black Trigger/ plunger
Warranty: 1 Year
This product is shipped with the following:
1 x 55cc clear barrel
1 x 55cc white wiper piston
1 x 55cc red end cap
1 x orange tip cap
1 x 14 gauge tapered tip olive
1 x 16 gauge tapered tip grey
1 x 18 gauge tapered tip green
Order part code AD755SG-KIT if a full component kit is required. Suitable materials proven to work with
this gun include solder pastes, solder fluxes, PVA glues, RTV's,
silicones, sealants, greases, SMT adhesives, pre-mixed and frozen
epoxies, single part epoxies, gels, adhesives, primers, inks and other
assembly fluids
.
Guns are portable and can be used in a factory production or assembly department as well as for repair and re-work. Guns are commonly used in the field for repair or maintenance applications. Common applications include:-
Deposits of solder paste
Deposits of solder flux
Grease to lubricate bearings
PVA glue to small furniture joints
RTV to seal cases
Silicone deposits and beads
Gasket sealant and silicone repair
Shots of roach insecticides
General adhesive application
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
- Materials: Polypro/ Nylon
- Capacity: 55cc or 55ml
- Length: 195mm
- Height: 135mm
- Weight: 110 grams
- Colour: Grey Handle/ Black Trigger
- Warranty: 1 Year
This product is shipped with the following:
1 x 55cc clear barrel (part code 7550LL1NPK)
1 x 55cc white wiper piston (part code 730009WPK)
1 x 55cc red end cap (part code 73000CRPK)
1 x orange tip cap (part code 7015LLPK)
1 x 14 gauge tapered tip (part code TTN14)
1 x 16 gauge tapered tip (part code TTN16)
1 x 18 gauge tapered tip (part code TTN18)
Order part code AD730SG-KIT if a full component kit is required.Do not use this product with Cyanoacrylate adhesives, rapid cure two-component epoxies or aggressive solvents. Suitable materials proven to work with this gun include solder pastes, solder fluxes, PVA glues, RTV's, silicones, sealants, greases, SMT adhesives, pre-mixed and frozen epoxies, single part epoxies, gels, adhesives, primers, inks and other assembly fluids.
|
