AD30T-2 is a black rubber wiper piston stopper that is used to prevent tunnelling in high viscosity fluids - care should be taken to ensure the piston is suitable for the dispensing application. For use with 30cc and 55cc size barrels only.

Pistons ensure that the pressure is evenly spread across the fluid surface to provide consistent dispensing. Wiper seal pistons prevent dripping and eliminate material waste by wiping the syringe barrel wall clean as fluid is dispensed. Maximum operating pressure is 100psi (6.9 Bar).

Wiper pistons are a tighter fit for use with low to medium viscosity fluids or with mechanical devices such as our manual syringe gun to help slow down leakage past the double wiping edges. Supplied in a sealed pack of 50 with labels and batch codes.

---

MPN: 30T-2A
Type: Plasticised Rubber/ Neoprene
Colour: Black Opaque
Height: 16.0 mm
Outer Diameter: 22.63mm
Commodity Code: 39269097
Brand: Adhesive Dispensing Ltd
Pack Size: 50

Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.

---

• Material: Rubber
• Colour: Black
• For Barrel Size: 30cc & 55cc only

Pistons are made of rubber and have dual blades to wipe the adhesive, paste or liquid from inside the syringe barrel as they move down. The blades also act to stop liquids from going past them as they dispense. Once a syringe has liquid inside, insert the piston and push down on one side. This will allow air to escape and ensures the piston sits directly on the fluid without an air gap. When bottom filling using a barrel filler, the piston is pushed down and moves up as the liquid is fed into the syringe barrel.

This product will ship via tracked courier.