The AD300L-A is a large industrial barrel kit that includes wiper piston, threaded air cap and airline hose with quick connector. It will connect directly into any air-powered dispenser. Load the barrel with material, insert the wiper piston, attach the air cap to the air-powered dispenser. Use any luer lock dispensing tip. As the barrel is pressurised, the piston moves down to dispense the material consistently. Suitable for use with UV cure adhesives.
Features a double helix luer lock for secure dispense tip attachment. Supplied as a complete assembly. Amber (tinted) colour. This large barrel can also be used as a fluid reservoir to feed liquids and pastes directly into our dispense valves. Amber provides protection of UV/visible light block (up to 520nm).
Maximum operating pressure is 100 psi (6.9bar). Individual barrels and pistons are available to order seperately as the air cap and hose assembly can be reused.
MPN: AD300L-A
Barrel Material: High Density Polypropylene (HDPP)
Piston Material: Plasticised Rubber
Volume Capacity: 300cc (300ml)
Tip Connection: Luer Lock
Barrel Length: 7.87" - 200.0mm
Barrel OD: 2.16" - 55.0mm
Barrel ID: 2.00" - 51.0mm
Barrel Tip Hole Outlet Size 0.118" (3.00mm)
Barrel Colour: Amber (Tinted)
Piston Colour: White
Mfg Part AD300XL-A
Commodity Code: 39269097
Brand: Adhesive Dispensing Ltd
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
   
- Materials Polypropylene (Barrel) Rubber (Piston)
- Capacity 300cc (300ml)
- Length 7.87" - 200.0mm
- Outer Diameter 2.16" - 55mm
- Inner Diameter 2.00" - 51mm
- Colour Amber (Barrel) White (Piston)
Syringe barrels are designed for use with pneumatic dispensing equipment or syringe guns. They are thick walled with wide flanges and so designed for high pressures. The internal bore is zero draft meaning there is no taper. This ensures the wiper piston inside moves down without restriction to improve dispense performance.
Use these barrels with UV cure, pastes, adhesives, solvents, epoxies, RTVs, silicones, PVAs, inks and gels. This range have luer lock ends for twist on tip attachment.
These products are safe for use up to 100 psi pressure. Barrels are precision manufactured for industrial applications.
Components are certified silicone-free components and will not contaminate any fluids that are dispensed from them.
|
