![](/v/vspfiles/templates/140/images/DBox_Border_Left_Top.gif) |
![](/v/vspfiles/templates/140/images/clear1x1.gif) |
![](/v/vspfiles/templates/140/images/DBox_Border_Right_Top.gif) |
![](/v/vspfiles/templates/140/images/clear1x1.gif) |
Smooth flow tapered tips allow for the controlled dispensing of most pastes, gels and liquids. The tapered design reduces material back pressure and eases the flow as there is no restriction from entry to exit points. This means that much higher viscosity materials can be applied easier, at lower pressures for consistent deposit results.
AD21TT is a high quality 21 gauge tapered dispensing tip and will apply pastes, silicones, sealants, RTV's, epoxies, grease and most other medium to high viscosity fluids. It features a double helix luer locking thread for leak free safe attachment under pressure. It is coloured and provides some light filter protection for UV cure adhesives. Safe for use up to 100 psi pressure for pneumatic dispensing. Silicone free polyethylene will not contaminate any sensitive adhesives used.
This tip is suitable for use with luer lock and luer slip syringe barrels, larger cartridges (using a tip adapter), with luer fittings and with metering valves. Pricing is a sealed box of 50 tips. Our tapered tips are available in 18 different diameter sizes from 8 Gauge (3.5mm ID) to 32 Gauge (0.10mm ID). We also now offer a range of tapered tips with a 30 degree angle bend.
MPN: AD21TT-50 Material: Polyethylene (MDPE)
Colour: Purple ID: 0.020" - 0.51mm Total Length: 1.25" - 31.75mm Maximum Pressure: 100 PSI Attachment: Luer Lock
Details: Industrial Grade, Silicone Free Commodity Code: 39269097 Pack Size: 50 Packaging: Sealed Box Brand: Adhesive Dispensing Ltd
Adhesive Dispensing Ltd provide a wide range of equipment options for dispensing almost all assembly fluids - from watery liquids, solvents, primers and activators through to thick pastes, sealants, silicones, gels and epoxies.
- Material: Polyethylene
- Colour: Purple ID: 0.020" - 0.51mm
- Length: 1.25" - 31.75 mm
- Details: Industrial grade, Silicone Free
Tapered tips are designed to work with all luer lock and luer slip syringe barrels and fittings. They are fully compatible with most fluids, adhesives, pastes and gels and useful for high viscosity pastes, sealants, silicones, mastics, solder pastes and compounds.
All tips are safe for use up to 100 psi pressure. These tips are precision manufactured for industrial use. Tips are certified silicone-free components to ensure they do not contaminate any fluids or adhesives that are dispensed from them.
Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.
|
|
![](/v/vspfiles/templates/140/images/clear1x1.gif) |
![](/v/vspfiles/templates/140/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/140/images/clear1x1.gif) |
![](/v/vspfiles/templates/140/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/140/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/140/images/clear1x1.gif) |
![](/v/vspfiles/templates/140/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/140/images/DBox_Border_Left_MidDiv.gif) |
![](/v/vspfiles/templates/140/images/clear1x1.gif) |
![](/v/vspfiles/templates/140/images/DBox_Border_Right_MidDiv.gif) |
![](/v/vspfiles/templates/140/images/clear1x1.gif) |
Features
- Smooth flow design reduces pressure for thick pastes
- UV filter will not affect certain adhesives 10, 11, 13, 14, 16, 18, 20, 22, 25, 27, 30, 32 gauge sizes in the range
- Helix safety locking hubs will not loosen under pressure
- Silicone free safe ensure no contamination of adhesives dispensed
- Supplied in sealed packs with labels
- Safe to use up to 100 psi guaranteed
|
|
![](/v/vspfiles/templates/140/images/clear1x1.gif) |
![](/v/vspfiles/templates/140/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/140/images/clear1x1.gif) |
![](/v/vspfiles/templates/140/images/DBox_Border_Right_Bottom.gif) |
|
![](/v/vspfiles/templates/140/images/clear1x1.gif) |
![](/v/vspfiles/templates/140/images/clear1x1.gif)
![](/v/vspfiles/templates/140/images/clear1x1.gif)
|