 |
 |
 |
|
Cartridge reservoir in high density polyethylene with wiper plunger in a kit of 10 x TS80C cartridges and 10 x TS1WP plungers. 8 ounce/ 230cc ml size. Suitable for handling most materials including solvent based fluids. 1.69" outer diameter by 8.82" long. Suitable for use in cartridge guns or pressurised cartridge retainers and caps.
Cartridges feature a 1/4" NPT (6mm) female thread dispensing orifice for secure attachment of nozzles or 1/4" threaded fittings.
Part ID: TS80CKIT
Material: High Density Polyethylene (Cartridge) Low Density (Plunger)
Colours: Clear (Natural) both cartridge and plunger
Cartridge Capacity: 8oz (237cc)
Cartridge Length: 8.82"
Cartridge OD: 1.69"
Details: Industrial Grade Safe, Silicone Free
Commodity Code: 39269097
Pack Size: 10 Cartridges, 10 Plungers
Lead Time: In Stock
- Part ID: TS80CKIT
- Material: High Density Polyethylene (Cartridge) Low Density (Plunger)
- Colour: Clear (natural) both cartridge and plunger
- Cartridge Capacity: 8oz (237cc)
- Cartridge Length: 8.82"
- Cartridge OD: 1.69"
- Details: Industrial Grade Safe, Silicone Free
Cartridges are designed for use with pneumatic dispensing equipment or manual guns. They are thick walled and so designed for high pressures. The internal bore is zero draft meaning there is no taper. This ensures the wiper plunger inside moves down without restriction to improve dispense performance.
Use these cartridges with pastes, adhesives, solvents, epoxies, RTVs, silicones, PVAs, inks and gels. This range have /4" NPT end thread for nozzle attachment.
These products are safe for use up to 100 psi pressure.
Components are certified silicone-free components and will not contaminate any fluids that are dispensed from them.
This product will ship via tracked courier.|
Suitable for... |
 |
Adhesives
|
 |
Silicone's
|
 |
Epoxies
|
 |
Primers
|
 |
Solvents
|
 |
Lubricants |
 |
Pastes |
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Silicone and chloride free Industrial grade safe to 100 psi
- Resistant to aggressive fluids and solvents
- High density moulding
- 1/4" NPT thread
- Compatible with industry standard guns
|
|
|
|
|
|
|
|
|
