Fisnar QuantX Evenpress 8001006 Smooth-Flow, low-friction wiper pistons are recommended for most dispensing applications. The double-wipe design prevents air entrapment and material waste by wiping the syringe barrel wall clean. 3cc size. These parts are silicone and chloride-free. The pistons made from polyethylene. Supplied in sealed packs.
The rounded end design provides an easier flow path to reduce material back pressure. It adds a benefit for less air entrapment when filling. These products are superior performance and premium grade.
This universal polyethylene wiper piston seals the material from air, provides a consistent wipe, protects against liquid drawback and reduces fumes. Using a piston is suitable for thick pastes, gels or watery liquids to improve the flow. Maximum operating pressure for all components is 100 psi (6.9bar). Supplied in a pack of 50 parts.
Pistons ensure that the pressure is evenly spread across the fluid surface to provide consistent dispensing. Wiper seal pistons with dual blades prevent dripping and eliminate material waste by wiping the syringe barrel wall clean as fluid is dispensed. Maximum operating pressure is 100psi (6.9 bar). White wiper pistons are a perfect fit for use with all viscosity fluids or with mechanical devices such as our manual push rods to help slow down leakage past the double wiping edges.
MPN: 8001006
Material: Polyethylene (MDPE)
Colour: Green Opaque
For Barrel Size: 3cc
only
Details: Silicone Free, Industrial Grade
SKU: 0401-08-000006
Maximum Pressure: 100 PSI
Commodity HS Code: 39269097
Brand: Fisnar
Details: Silicone-Free, Industrial Grade
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
Syringe barrels are designed for use with pneumatic dispensing equipment or syringe guns. They are thick walled with wide flanges and so designed for high pressures. The internal bore is zero draft meaning there is no taper. This ensures the wiper piston inside moves down without restriction to improve dispense performance. Use these barrels with pastes, adhesives, solvents, epoxies, RTVs, silicones, PVAs, inks and gels. This range have luer lock ends for twist on tip attachment.
Barrels are shipped with every new dispenser and syringe gun that we supply. Barrels are moulded in high density plastics and have much thicker walls than a medical grade syringe. The internal bore has no taper and this ensures the wiper piston moves consistently down the barrel without restriction. The wide flanges at the top are for quick attachment to the air adapter assembly (to a dispenser) or to a manual syringe gun. This design ensures syringe barrels do not come loose or break under air pressures up to 100 psi. The luer lock tip attachment provides secure dispensing under high pressure.
Pistons have blades to wipe the adhesive, paste or liquid from inside the syringe barrel as they move down. The blades also act to stop liquids from going past them as they dispense. Once a syringe has liquid inside, insert the piston and push down on one side. This will allow air to escape and ensures the piston sits directly on the fluid without an air gap. When bottom filling using a barrel filler, the piston is pushed down and moves up as the liquid is fed into the syringe barrel. Pistons can provide a barrier seal for liquids placed inside. But for more protection when dispensing watery liquids and cyanoacrylate adhesives, use our filter trap in the airline adapter assembly to your syringe dispenser.
