Techcon dispensing syringe barrel components are designed to work with dispensing equipment - either manually or on a pneumatic dispenser. Silicone and chloride free. Dispensing components ensure accuracy, repeatability and productivity. Component sizes 3cc, 5cc, 10cc, 30cc and 55cc.
Premium dispensing syringe barrels are made from low friction polypropylene to ensure accuracy, repeatability and productivity. Features a double Helix Luer lock for secure dispense tip attachment. Supplied in sealed packs of 50 pieces. Amber provides protection of UV/visible light block (up to 520nm).
Pistons available for all barrel sizes as well as end caps and adapter assemblies. Maximum operating pressure is 100 psi (6.9bar). Use amber syringes with UV sensitive adhesives and fluids.
Specifications:
Material Polypropylene
Capacity 10cc (10ml)
Length 3.58" - 90.93mm
Outer Diameter 0.72" - 18.36mm
Inner Diameter 0.62" - 15.72mm
Colour Amber (Tinted)
Commodity Code: 39269097
Brand: Techcon
Pack Size: 50 pieces
Adhesive
Dispensing Ltd provide a wide range of equipment options for dispensing
almost all assembly fluids - from watery liquids, solvents, primers and
activators through to thick pastes, sealants, silicones, gels and
epoxies.
- Material Polypropylene
- Capacity 10cc (10ml)
- Length 3.58" - 90.93mm
- Outer Diameter 0.72" - 18.36mm
- Inner Diameter 0.62" - 15.72mm
- Colour Amber
Syringe barrels are designed for use with pneumatic dispensing equipment or syringe guns. They are thick walled with wide flanges and so designed for high pressures. The internal bore is zero draft meaning there is no taper. This ensures the wiper piston inside moves down without restriction to improve dispense performance.
Use these barrels with pastes, adhesives, solvents, epoxies, RTVs, silicones, PVAs, inks and gels. This range have luer lock ends for twist on tip attachment. Use black barrels for UV cure adhesives, amber barrels for UV sensitive adhesives and clear barrels for all other liquids.
|
